Datasheet

Datasheet Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
11
Accessories Industrial Power Relay RT / RP / SR2M
I
For Industrial Power Relay RT / RP / SR2M,
pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm
II
Din-rail socket with logical setup of connections (input/output)
I
New retainer clip with ejection function
I
Easy replacement of relays on a densely packed DIN rail
I
High quality rising clamp terminals
I
Captive combination terminal screws
I
No reduction of protection class or creepage/clearance with
plastic retainer
I
Simple plug-in indicator- and protection modules
I
White snap-on marking tags
II
RoHS compliant (Directive 2002/95/EC)
Socket with screw-type terminals for DIN rail mounting
Approvals
V REG.-Nr. 6106 in preparation, Z E135149
Technical data RT 78 724 / RT 78 726
Rated current 12 A *)
Rated voltage / max.switching voltage AC 240/400 VAC
Dielectric strength coil-contact circuit 4000 V
rms
open contact circuit 1000 V
rms
adjacent contact circuits 2500 V
rms
Clearance / creepage coil-contact circuit RT: W 10 / 10 mm; RP, SR2M: W 8 / 8 mm
F0228-B
RT 78 724 Socket with screw-type terminals, pinning 3.5 mm for DIN rail mounting
I
Not suitable for bistable relays with 2 coils!
S0416-AA
F0261-A
F0262-A
S0416-AB
RT 78 726 Socket with screw-type terminals, pinning 5 mm for DIN rail mounting
*) For 1 pole relays (16 A) the relay
terminals 11-21, 12-22 and 14-24 have to
be bridged.
For 1 pole relays (12 A) the relay terminals
11-12-14 have to be connected to the
socket terminals 21-12-24