Datasheet
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
n
Module width 6.2 mm
n
Reduced system width for increased packing density
on the DIN rail
n
DC and AC version
n
Electrical indicator as standard (LED)
n
Protection circuit
n
Screw- or cage clamp terminals
n
Jumper bars
Approvals
VDE Cert. No. 40010063, cULus E224918
Technical data ST3F/ST4F
Rated voltage/Max. switching voltage AC 240/400 VAC
Rated current 6 A
Dielectric strength coil-contact circuit 4000 V
rms
Clearance / creepage coil-contact circuit ≥ 6/8 mm
Material group of insulation parts IIIa
Insulation to IEC 60664-1
Type of insulation coil-contact circuit reinforced
open contact circuit functional
Rated insulation voltage 250 V
Pollution degree 2
Rated voltage system 230/400 V
Overvoltage category III
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature range -20…+55˚C
Terminals screw / cage clamp
Terminal screw torque acc. IEC 61984 0.5 Nm
max. 0.6 Nm
Wire cross section
single wire 0.14...2.5 mm
2
fine wire
0.14...2.5 mm
2
with bootlace crimp (DIN 46228/1) 0.14...2.5 mm
2
Insertion cycles A (10)
Max. Insertion Force total 100 N
Mounting distance ≥ 0 mm, dense packing
Weight 26 g
Packaging unit 10 pcs
Sockets
Product code Part Number
ST 3F LC4 DIN-rail socket 24VDC, for relays 2-1416100-0
12/24/48 VDC, with LED, protection
and polarity diode, screw terminals
ST 3F SM5 DIN-rail socket 115VAC/VDC with 2-1416100-1
LED and protection circuit,
screw terminals
ST 3F TP0 DIN-rail socket 230VAC/VDC with 2-1416100-2
LED and protection circuit,
screw terminals
ST 4F LC4 DIN-rail socket 24VDC, for relays 2-1416100-3
12/24/48 VDC, with LED, protection
and polarity diode, cage clamp terminals
ST 4F SM5 DIN-rail socket 115VAC/VDC with 2-1416100-4
LED and protection circuit,
cage clamp terminals
ST 4F TP0 DIN-rail socket 230VAC/VDC with 2-1416100-5
LED and protection circuit,
cage clamp terminals
General Purpose Relays
Accessories
Accessories Slim Interface Relay SNR
Z
Version with
screw terminals
F0260-B
S0487-AA
S0487-AA
Version with
cage clamp terminals