SDS

Safety Data Sheet
According to HCS-2012 APPENDIX D TO §1910.1200
Version: 1.0/EN Revision date: 21/04/2015
Product name: Lithium-ion Polymer Battery Printing date: 21/04/2015
-- Page 1 / 7 --
1. Identification
(a) Product identifier
Product name: Lithium-ion Polymer Battery
(b) Other means of identification
Product description: Model: 605062
Nominal Voltage: 3.7V
Ampere-hour: 2.4Ah
Typical Capacity: 2400mAh
Weight: 46g
Dimension: 65.0mm×50.0mm×5.9mm (L×W×T)
(c) Recommended use of the chemical and restrictions on use
Recommended use: Battery.
Restriction on use: No information available.
(d) Details of the supplier of the product
Company name(China) SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD.
Address: Chaoshun Industrial Zone, Renmin Road, Fumin, Guanlan, Baoan, Shenzhen,
Guangdong, China
E-mail: [e-mail]
Telephone: [phone] -887
(e) Emergency phone number
[phone] -887
2. Hazard(s) identification
(a) Classification of the chemical
The batteries are defined as "articles", they are exempted from the requirements of the Hazard Communication
Standard. A sealed Lithium-ion Polymer Battery is not hazardous in normal use.
(b) Label elements
Pictogram(s): No pictogram.
Signal word: No signal word.
Hazard statements: No hazard statement.
Precautionary statements: No precautionary statement.
(c) Description of any hazards not otherwise classified
In case of mistreatment (abusive over charge, reverse charge, external short circuit…) and in case of fault some
electrolyte can leak from the cell through the safety device. In these cases refer to the risk of the electrolyte. Contact
with internal components may cause irritation or severe burns. Irritating to eyes, respiratory system, and skin. The
electrode materials are only hazardous, if the materials are released by mechanical damaging of the cell or if exposed to
fire.
Skin touch: Contact with battery electrolyte may cause burns and skin irritation.