User Manual

• 4 •
CHARGING THE INTERNAL BATTERY USING THE BUILT-IN 3.2
CHARGER:
After removing the Memory Saver from the carton, charge it overnight
before using, even if the CHARGED (green) LED glows.
Tocharge,plugan18gauge(AWG)orlargerextensioncordintothe•
chargerplugontherightsideoftheNIN-7A-OBDMemorySaver.(Exten-
sioncordnotincluded;mustbepurchasedseparately.)
Plugtheextensioncordintoa120VACelectricalwalloutlet.•
The CHARGING • (red)LEDwillglowindicatingcharging.
The CHARGED • (green)LEDwilllightwhenthebatteryhasreached
full charge. This could take up to 72 hours due to the age and condition
of the battery. The charger will automatically go into maintain mode and
maintain the battery at full charge without damaging it.
Charge the NIN-7A-OBD Memory Saver as soon as possible after use.•
You may also charge the internal battery while driving, using the male-to-
malechargercable(p/n38-99-001564–notincluded).Insertoneendof
the accessory cable into the 12V DC power outlet and the other end into
thevehicle’saccessoryoutlet(lightersocket).Completelydisconnectthe
charger cable when the engine is not running.
The CHARGING (red)LEDandtheCHARGED (green)
LED do not operate during this method of charging. Using this
method to charge the battery overrides the maintain mode and
the battery can be overcharged. Monitor the progress of the
batteryandwhenitreachesafull(100%)charge,disconnect
the charger. Do not charge for more than four hours and do not
leavethebatteryunattendedoritcouldexplodecausingproperty
damage or personal injury.