Atom 2 S2 1-12 GT12 Pan Car Manual
Table Of Contents
- atom 2 manual front cover
- atom 2 manual PAGE 1
- atom 2 manual PAGE 2
- atom 2 manual PAGE 3
- atom 2 manual PAGE 4
- atom 2 manual PAGE 5
- atom 2 manual PAGE 6
- atom 2 manual PAGE 7
- atom 2 manual PAGE 8
- atom 2 manual PAGE 9
- atom 2 manual PAGE 10
- atom 2 manual PAGE 11
- atom 2 manual PAGE 12
- atom 2 manual PAGE 13
- atom 2 manual PAGE 14
- atom 2 manual PAGE 15 Spares List 1
- atom 2 manual PAGE 16 Spares List 2
- atom 2 manual PAGE 17 Spares List 3
- atom 2 manual PAGE 18 Spares List 4
- atom 2 manual PAGE 19
- atom 2 manual PAGE 20
- atom 2 manual PAGE 21
- atom 2 manual PAGE 22
- atom 2 manual PAGE 23
- atom 2 manual PAGE 24
- atom 2 manual PAGE 25
- atom 2 manual PAGE 26
- atom 2 manual PAGE 27 Speed Secrets
- atom 2 manual Setup Blank
- atom 2 manual Setup Kit Build
Use the shims to adjust droop.
Base setting is two shims.
RH Thread
LH Thread
Longer link
Shorter link
Carefully screw the sockets onto the turnbuckle
until no threads are visible.
Then undo them to the desired length.
This allows for easier adjustment on the car.
(Greasing the threads will also help)
15.20mm
LH Thread
RH Thread
Note the shape of
the turnbuckle.
This side of the
turnbuckle is the
left hand thread.
Use the included spanners
to tighten sockets.
e’clip
x 2
STEP 13
PAGE 11
STEP 14
A