CAT L1 Evo Setup Sheet - Blank

.......................
mm
.....................
Spring Shock Cap Sealed
Vented Aeration
.......................
mm
lb/incSt
Oil..................
Piston.................. Drilled Hole Size..................mm
Internal Limiters...............mm Kashima Body No Yes
Shock Stand Off Spacing .................
mm
cSt
lb/in
Spring Shock Cap Sealed
.....................
Vented Aeration
Oil..................
Piston.................. Drilled Hole Size..................mm
Internal Limiters...............mm Kashima Body No Yes
2° 3° 4°
Ride Height
..............
mm
Camber at Ride Height
............
Deg
Pin Angle 8° 10° 12°
Pin Width Narrow Mid Wide
Ride Height
..............
mm
Camber at Ride Height
.............
Deg
Wheelbase
Short Long
Shock Mount C/F S2
Link Washers
......................
mm
...............
mm
Anti-squat
1°
Link Mount
Kit Alloy
Hub Washers
............
mm
Link Washers
............
mm
Rear Strap
High Pin - Arrows up (U7977) Low Pin - Arrows down (Kit)
Hub Carrier
Kit Alloy
Brass insert
Hi-Pin Low-Pin
Wheelbase Short Med Long
Shock Mount C/F S2
Anti Roll Bar
None 1.2 1.4 1.6 1.8 1.9 2.0 2.1
Hub Spacer High Low
Toe
.............
Deg
Yoke
8° 10° 12°
Driveshaft Kit Roche
Bump Steer
Washers
Chassis Kit Flex
Car Weight g
Front Topdeck S2 2.0mm C/F 2.5mm C/F 3.0mm
Rear Topdeck 2.5mm 3.0mm
Sidepods S2 C/F
Front Hex -0.75 0 0.75 1.5
Rear Hex -0.75 0 0.75 1.5
Bodyshell Thickness Rear Wing
E.S.C C/F Tray Brass Tray
Servo
Receiver C/F Tray Brass Tray
LiPo Front Middle Rear
Rear Wing Gurney Height
Front Wing Small Big
Front Wing Gurney Height
Slipper 2Plate 3Plate
Grip Level High Medium Low
Type Tight Open Mixed
Surface Clay Astro Grass Mixed Carpet
Condition Smooth Bumpy Mixed
Jumps Small Medium Large Mixed
Name
Date
Event / Track
Weather
Result
Toe In
4° 3.5° 3° 2.5°
2° 1.5° 1° 0.5°
Ball Stud Washer
Yoke
Med Stiff Alloy
Wishbone
Med Stiff Carbon
Hingepin Steel Ti
Strap Alloy Brass
Bumper Stiff Carbon
Housing Kit Alloy
Housing Kit Alloy
Front Wheels Rear Wheels
Front Tyres Rear Tyres
Front Inserts Rear Inserts
Front Diff
Height High Mid Low
Oil cSt 2 Gear 4 Gear
Kit Alloy Carbon
Anti Roll Bar
None 1.2 1.3 1.4 1.6 1.8 1.9 2.0 2.1
Driveshaft U/J CVD
Gearbox Riser Yes No
Height High Mid Low
Oil cSt 2 Gear 4 Gear
Kit Alloy Carbon
Hingepin Steel Ti
Wishbone
Med Stiff Carbon
Hingepin Steel Ti Hingepin Steel Ti
Notes
Driver Details
Front
Rear
Chassis and Electrics
Track Conditions
Other settings
Motor
Rotor Diameter
Timing
Spur Size
Pinion Size
Wheels, Tyres and Inserts
Rear Diff
Front Shocks
Rear Shocks
Motor and Gearing