Datasheet

Non resettable fuses

SPT 6.3x32

www.schurter.com/PG01_2

Fuses

Miniature Fuse, 6.3 x 32 mm, Time-Lag T, Sand, 250 VAC

250 VAC · Time-Lag T

Description

- Available on request

- H = High Breaking Capacity

- UL Standard Fuse

Standards

- UL 248-14

- CSA C22.2 no. 248.14

Approvals

- UL File Number: E42088

References

We recommend for new applications the type SHT 6.3x32

Weblinks

pdf-datasheet, html-datasheet, General Product Information, Approvals,

CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop,

SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for

product

Technical Data

Rated Voltage 150 - 250 VAC, 48 - 63 VDC

Rated current 0.5 - 32 A

Breaking Capacity 1 kA - 20 kA

Characteristic Time-Lag T

Mounting Fuseholder / Clip

Admissible Ambient Air Temp. -40 °C to 85 °C

Climatic Category 40/085/21 acc. to IEC 60068-1

Material: Tube Glass with sand filling (1-8 A), ceramic

with sand filling (10-32 A)

Material: Endcaps Nickel-Plated Copper Alloy

Unit Weight 2.45 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking , Rated current, Rated voltage, Cha-

racteristic, Approvals

Dimension

32 mm

ø 6.35

31.8

±0.8

±0.1

PAGE 1
SPT 6.3x32 Non resettable fuses www.schurter.com/PG01_2 Miniature Fuse, 6.3 x 32 mm, Time-Lag T, Sand, 250 VAC 250 VAC · Time-Lag T Description References - Available on request - H = High Breaking Capacity - UL Standard Fuse We recommend for new applications the type SHT 6.
PAGE 2
SPT 6.3x32 Non resettable fuses www.schurter.com/PG01_2 Pre-Arcing Time Rated Current In 1.1 x In min. 0.5 A - 4 A >4 h 5 A - 16 A >4 h 1.9 x In max. 2.1 x In max. 2.75 x In min. 2.75 x In max. 60 min 4.0 x In min. 4.0 x In max. 10.0 x In min. 10.0 x In max. 2s 40 s 150 ms 2.5 s 5 ms 40 ms 60 min 3s 50 s 400 ms 4s 15 ms 100 ms 20 A - 25 A 60 min 3s 50 s 400 ms 4s 15 ms 100 ms 32 A 60 min Time-Current-Curves 100000 ≤4A _> 5 A 10000 1000 Time in Seconds 100 10 1 0.
PAGE 3
SPT 6.3x32 Non resettable fuses www.schurter.com/PG01_2 Rated Current [A] Rated Voltage [VAC] Breaking Capacity Voltage Drop 1.0 In max. [mV] Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.5 In typ. [mW] Melting I²t 10.0 Intyp. [A²s] Order Number 1) IEC: 1500 A @ 250 VAC, p.f. = 0.7 - 0.8 1) UL: 1500 A @ 250 VAC, p.f. = 0.7 - 0.8 / 10 kA @ 125 VAC, p.f. = 0.7 - 0.8 / 20 kA @ 63 VDC 2) UL: 1000 A @ 250 VAC, p.f. = 0.95 - 1,0 / 20 kA @ 63 VDC 3) UL: 1000 A @ 150 VAC, p.f. = 0.