Datasheet

ManualsBrandsSchurter ManualsFuse Holders & AccessoriesFuse Holder, 5 x 20 mm, Thermoplastic, Thermoset, 250V

Fuse holder

FEP

https://www.schurter.com /PG02

Fuses

Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip

See below:

Approvals and Compliances

250 VAC · 2.5 W / 6.3 A (VDE) · 500 VAC/DC · 10 A (UL/CSA)

Description

- Screw type fuse carrier

Weblinks

pdf datasheet, html-datasheet, General Product Information, Packaging

details, Distributor-Stock-Check, Detailed request for product, Microsite

Technical Data

Shock-Safe Category PC1

Fuse-Link 5 x 20 mm

Mounting Panel mount, Front Side

Attachment Fixing Nut

Terminal Solder or Quick-Connect 2.8 x 0.5 mm

Rated Voltage 250 VAC (VDE), 500 VAC/DC (UL/CSA)

Rated current 6.3 A (VDE), 10 A (UL/CSA)

Rated Power Acceptance IEC 2.5 W / 6.3 A @ Ta 23 °C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Degree of Protection IP 42

Protection Class Suitable for appliances with protection

class I acc. to IEC 61140

Admissible Ambient Air Temp. -25 °C to 85 °C

Climatic Category 25/085/21 acc. to IEC 60068-1

Material: Socket Thermoset, black, UL 94V-0

Material: Cap Thermoplastic

Material: Terminals Tin-Plated Copper Alloy

Unit Weight 6.1 g / 4.6 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking , Type, Rated Voltage, Rated current,

Approvals

Soldering Methods Iron

Soldering Profile

Solderability 350 °C / 3 sec acc. to IEC 60068-2-20,

Test Ta, method 2

Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,

Test Tb, method 2

Contact Resistance ≤ 10 mΩ at 20 mV

Dielectric Strength > 1 kV between life parts

(50 Hz: 1 min)

Impulse Withstand Voltage > 4 kV between life parts

Insulation Resistance ≥ 20 MΩ between life parts

(1000 VDC: 1 min)

Overvoltage Category II acc. to IEC 60664-1

Pollution Degree 2 acc. to IEC 60664-1

Admissible Torque on Fixing

Nut

max 1.2 Nm

Panel Thickness max 3 mm

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: FEP

Approval Logo Certificates Certification Body Description

VDE Approvals VDE VDE Certificate Number: 40043890

UL Approvals UL UL File Number: E39328

Summary of content (3 pages)

PAGE 1
FEP Fuse holder https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip 250 VAC · 2.5 W / 6.
PAGE 2
FEP Fuse holder https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Design Standard Description Designed for applications acc.
PAGE 3
FEP Fuse holder https://www.schurter.com /PG02 Derating Curves 5x20 mm Admissible Power Acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C All Variants Holder Cap Terminal Position End-Terminal Degree of Protection Order Number l Fingergrip Solder 4.0 x 0.5 mm 30° to Fuse Axis IP 42 0031.1001 l Fingergrip Quick-Connect 2.8 x 0.5 mm 90° to Fuse Axis IP 42 0031.