Datasheet

1
Fuseholders
FIN
www.schurter.com /PG02
Fuses
Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap, IP 67
Variant 2
250 VAC · 2.5 W / 10 A (VDE) · 250 VAC/DC · 10 A (UL/CSA)
Description
- Screw type fuse carrier
Unique Selling Proposition
- Complete protection against touch
- Protection against temporary submergence
- Compact design
Standards
- IEC 60127-6
- UL 4248-1
- CSA 22.2 no. 4248.1
Approvals
- VDE Certificate Number: 133472
- UL File Number: E39328
Weblinks
pdf-datasheet, html-datasheet, General Product Information, Packaging
details, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS,
REACH, Distributor-Stock-Check, Detailed request for product
Technical Data
Shock-Safe Category PC2
Fuse-Link 5 x 20 mm
Mounting Panel Mount, Front Side
Attachment Fixing Nut
Terminal Solder or Quick-Connect 2.8 x 0.5 mm
Rated Voltage 250 VAC (VDE), 250 VAC/DC (UL/CSA)
Rated current 10 A (VDE), 10 A (UL/CSA)
Rated Power Acceptance IEC 2.5 W / 10 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP 67
Protection Class Suitable for appliances with protection
class I or II acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoset, black, UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight 5.95 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Rated current,
Approvals
Soldering Methods Iron
Soldering Profile
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Contact Resistance < 5 mΩ at 20 mV
Dielectric Strength > 3 kV
> 4 kV between L/N-PE
(50 Hz; 1 min)
Impulse Withstand Voltage > 4 kV between L-N
> 6 kV between L/N-PE
Insulation Resistance > 10 MΩ between L-N
> 100 MΩ between L/N-PE
(500 VDC; 1 min)
Overvoltage Category I - III acc. to IEC 60664-1
Pollution Degree 1 - 3 acc. to IEC 60664-1
Admissible Torque on Fixing
Nut
max 1.2 Nm
Plattendicke max 6 mm