Datasheet

ManualsBrandsSchurter ManualsFuse Holders & AccessoriesFuse holder, 5 x 20 mm/6.3 x 32 mm, Thermoplastic, 250V

Fuseholders

FEU

https://www.schurter.com /PG02

Fuses

Shock-Safe Fuseholder, 5 x 20 / 6.3 x 32 mm, Slotted Cap

Socket with Slotted Cap

Caps must be ordered separately (see

accessories)

Socket with Slotted Cap Socket with Fingergrip Cap

See below:

Approvals and Compliances

250 VAC · 4 W / 10 A (VDE) · 600 VAC/DC · 20 A (UL/CSA)

Description

- Quick-conntect or solder terminals

Weblinks

pdf datasheet, html-datasheet, General Product Information, Packaging

details, Distributor-Stock-Check, Accessories, Detailed request for

product, Microsite

Technical Data

Shock-Safe Category PC2

Fuse-Link 5 x 20 or 6.3 x 32 mm

Mounting Panel Mount, Front Side

Attachment Fixing Nut

Terminal Solder or Quick-Connect 4.8 x 0.5 mm

Rated Voltage 250 VAC , 600 VAC/DC

Rated current 10 A (VDE), 20 A (UL/CSA)

Rated Power Acceptance IEC 4 W / 10 A @ Ta 23 °C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Degree of Protection IP 40

Protection Class Suitable for appliances with protection

class I acc. to IEC 61140

Admissible Ambient Air Temp. -40 °C to 85 °C

Climatic Category 40/085/21 acc. to IEC 60068-1

Material: Socket Thermoplastic, black, UL 94V-0

Material: Terminals Tin-Plated Copper Alloy

Unit Weight 5.5 g / 3.22 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking , Type, Rated Voltage, Rated current,

Approvals

Soldering Methods Iron

Soldering Profile

Solderability 350 °C / 2 - 3 sec acc. to IEC 60068-2-

20, Test Ta, method 2

Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,

Test Tb, method 2

Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6

Dielectric Strength > 3 kV

> 4 kV between L/N-PE

(50 Hz; 1 min)

Impulse Withstand Voltage > 4 kV between L-N

> 6 kV between Front Panel and L/N

Insulation Resistance > 10 MΩ between L-N

> 100 MΩ between Front Panel and L/N

(500 VDC; 1 min)

Overvoltage Category III acc. to IEC 60664-1

Pollution Degree 3 acc. to IEC 60664-1

Admissible Torque on Fixing

Nut

max 1.2 Nm

Panel Thickness max 7 mm

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: FEU

Approval Logo Certificates Certification Body Description

VDE Approvals VDE VDE Certificate Number: 40045912

UL Approvals UL UL File Number: E39328

Summary of content (4 pages)

PAGE 1
FEU Fuseholders https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 / 6.
PAGE 2
FEU Fuseholders https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Standard for Safety Fuseholders Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Design Standard Description Designed for applications acc.
PAGE 3
FEU Fuseholders 0 0 12.7 -0.1 0 12.7 -0.1 https://www.schurter.com /PG02 0 13 -0.3 0 12.2 -0.13 11.7 -0.13 Mounting holes Derating Curves Admissible Power Acceptance in Watt 4.0 3.5 3.0 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C All Variants Holder Cap Fuse-Link Terminal Position End-Terminal Degree of Protection Colour Cap Remark Order Number l - 5 x 20 or 6.3 x 32mm Quick-Connect 4.8 x 0.
PAGE 4
FEU Fuseholders https://www.schurter.com /PG02 Required Accessory Description Fingergrip FEU, FAU, FAC Caps Fingergrip for Holder FEU, FAU, FAC 15.03.2018 Caps to FEU, FAU, FAC Caps to Holder FEU, FEU (Med), FAU, FAC 4 Fuses The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable.