Datasheet

1 Products affected
*SBU (2-digit) / PG (3-digit) / PUG (3-digit) / Type (10-digit)
2 Type of change
 Change of material
 Modified label
 Improved electrical ratings
 Change of marking
3 Detailed description of change
The new material fulfils the glow wire requirements given in IEC60127-6:2014 and is free of halogenated
flame retardant and red phosphorus. The new material achieves reflow solderability acc. JEDEC
JSTD020E (Moisture sensitivity level 1)
Old product approval
New product approval
UL 4248-1 - CSA C22.2 no. 4248.1
10A, 500V AC or DC
IEC 60127-6 (VDE)
4W, 10A, 250V AC
UL 4248-1 - CSA C22.2 no. 4248.1
16A, 500V AC or DC
IEC 60127-6:2014 (VDE)
4W, 16A, 500V AC
4W, 10A, 500V AC (with cover)
2.5W, 10A, 500V AC (with transparent cover)
Old label
New label
Old product marking
New product marking
OGN
4W/10A 250V
OGN-SMD
4 Reason of change
Product improvement to fulfil the enhanced glow wire requirements according to the updated standard
IEC 60127-6:2014.
5 Release date
The change will be rolled-out starting ww 23/2017 and lasts approx. 6 months.
Product hierarchy no. *
Part no.
SBU
Type / Description
Customer part no.
SBU
PG
PUG
Type
01
002
030
0000000522
0031.8221
Circuit protection
OGN-SMD
n/a
0031.8222
n/a
0031.8225
n/a
1 Products affected
*SBU (2-digit) / PG (3-digit) / PUG (3-digit) / Type (10-digit)
2 Type of change
 Change of material
 Modified label
 Improved electrical ratings
 Change of marking
3 Detailed description of change
The new material fulfils the glow wire requirements given in IEC60127-6:2014 and is free of halogenated
flame retardant and red phosphorus. The new material achieves reflow solderability acc. JEDEC
JSTD020E (Moisture sensitivity level 1)
Old product approval
New product approval
UL 4248-1 - CSA C22.2 no. 4248.1
10A, 500V AC or DC
IEC 60127-6 (VDE)
4W, 10A, 250V AC
UL 4248-1 - CSA C22.2 no. 4248.1
16A, 500V AC or DC
IEC 60127-6:2014 (VDE)
4W, 16A, 500V AC
4W, 10A, 500V AC (with cover)
2.5W, 10A, 500V AC (with transparent cover)
Old label
New label
Old product marking
New product marking
OGN
4W/10A 250V
OGN-SMD
4 Reason of change
Product improvement to fulfil the enhanced glow wire requirements according to the updated standard
IEC 60127-6:2014.
5 Release date
The change will be rolled-out starting ww 23/2017 and lasts approx. 6 months.
Product hierarchy no. *
Part no.
SBU
Type / Description
Customer part no.
SBU
PG
PUG
Type
01
002
030
0000000522
0031.8221
Circuit protection
OGN-SMD
n/a
0031.8222
n/a
0031.8225
n/a
owner
dislercy
creation date
2016-08-11
release date
2017-01-30
released by
nowakfr
change order no
2011797
rev
A
page
1 of 2
D10-007-256
Product Change Notification Isolation material change OGN-SMD