Datasheet

1
Indicators
LFM
https://www.schurter.com /PG10
Switches
LED Reflector Holder round with 5 mm LED
Approvals and Compliances
Description
- Panel Mounting
- Illumination with 5 mm LED
- available with or without series resistor
- Housing chrome plated or black dull
- Solder terminals
Weblinks
html-datasheet, CAD-Drawings, Detailed request for product
Technical Data
Electrical Data
Current consumption 10 mA with Built-in Multiplier
LED Technical data LED see separate table
Climatical Data
Ambient temperature -25 to 55 °C
Storage Temperature -55 to 100 °C
Protection Class IP 67
Soldering Data
Solderability 235 °C / 2 sec acc. to IEC 60068-2-
20 , Test Ta, method 1
Resistance to Soldering Heat 350 °C / 5 sec acc. to IEC 60068-2-
20 , Test Tb, method 1B
Material
Housings Brass chrome-plated
Solder terminals Tin-Plated Copper
Nut Nickel-Plated Brass
Sealing Nitril rubber
Technical Data LED
LED red LED green LED yellow
Let-through courrent DC I
F
max.
30 mA 30 mA 30 mA
Power Loss P
V
max.
100 mW 100 mW 100 mW
Forward voltage
typ. 2.0 V; max. 3.0 V typ. 2.4 V; max. 3.0 V typ. 2.4 V; max. 3.0 V
Luminous intensity
min. 6.3 mcd; typ. 10 mcd min. 6.3 mcd; typ. 10 mcd min. 6.3 mcd; typ. 12 mcd
Viewing angle
60° 60° 60°
Peak wave lenght
typ. 635 nm typ. 565 nm typ. 585 nm
Reverse voltage
typ. 15 V typ. 15 V typ. 15 V
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.