User Manual

ManualsBrandsSchurter ManualsPushbutton SwitchesPiezo button, vandal-proof 100 mA 42 VAC/60 VDC 1NO IP67

SCHURTER GmbH

D – 79346 Endingen

www.schurter.com

Changes that contribute to technical improvement are subject to alternations.

Page

Date of issue

Author:

Date of change:

Changed by:

Change No.

Datasheet No.

Index

1 of 24

19.05.2008

SHO

26.07.11

SHO

10381

105.9524.200

Print date: 26/07/2011 11:54:00

Product Manual

PSE NO Switch

CONTENTS

CONTENTS ............................................................................................................................. 1

1 PRODUCT DESCRIPTION ............................................................................................... 3

1.1 Functional Description: NO Switch ......................................................................................................... 3

1.2 Functional Description: Illumination ....................................................................................................... 4

2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS ................................................... 5

2.1 Technical Data ........................................................................................................................................... 5

2.2 Component dimensions ............................................................................................................................ 7

2.3 Hole Dimensions ...................................................................................................................................... 13

2.4 Switching Symbols: Illumination ........................................................................................................... 14

2.5 Accessories .............................................................................................................................................. 16

3 ORDER NUMBERS ........................................................................................................ 17

3.1 M16 Series ................................................................................................................................................ 17

3.2 M19 Series ................................................................................................................................................ 17

3.3 M22 Series ................................................................................................................................................ 17

3.4 M22 / M24 / M27 / M30 with Ring Illumination ....................................................................................... 18

3.5 Lettering: .................................................................................................................................................. 20

4 PACKAGING .................................................................................................................. 22

5 QUALIFICATION TESTS ................................................................................................ 23

5.1 IP Protection Class .................................................................................................................................. 23

5.2 IK Protection Class .................................................................................................................................. 23

5.3 Salt-Spray Test ......................................................................................................................................... 23

5.4 Hygienic Switches for Food Processing Equipment ........................................................................... 23

Summary of content (24 pages)

PAGE 1
SCHURTER GmbH D – 79346 Endingen www.schurter.com Product Manual PSE NO Switch CONTENTS CONTENTS ............................................................................................................................. 1 1 PRODUCT DESCRIPTION ............................................................................................... 3 1.1 Functional Description: NO Switch .........................................................................................................3 1.
PAGE 2
SCHURTER GmbH D – 79346 Endingen www.schurter.com 6 APPROVALS .................................................................................................................. 24 7 COMPLIANCE ................................................................................................................ 24 Changes that contribute to technical improvement are subject to alternations. Page 2 of 24 Date of issue 19.05.2008 Author: SHO Date of change: 26.07.11 Changed by: SHO Change No.
PAGE 3
SCHURTER GmbH D – 79346 Endingen www.schurter.com 1 PRODUCT DESCRIPTIO N - Variety of design options concerning size, colour, shape, illumination, connection or lettering especially ideal for use in harsh environments high reliability, long lifetime with more than 30 mill. actuations no maintenance costs, since no mechanical wear parts easy to clean due to a tightly closed surface (IP 69K) 1.
PAGE 4
SCHURTER GmbH D – 79346 Endingen www.schurter.com 1.2 Functional Description: Illumination Ring Illumination Single or bi-colored ring illumination is possible for the PSE switches. When equipped with two colors, it is possible to either switch between the colors or to achieve a combination color, depending on the type of activation.
PAGE 5
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2 TECHNICAL DAT A AND DIMENSION AL DRAWINGS 2.1 Technical Data Electrical Data Switching Voltage max. (VAC/DC) 42/60 Switching Current max. (mA) 100 Rated Breaking Capacity (W) 1 Lifetime (at Rated Breaking Capacity) (Mio.
PAGE 6
SCHURTER GmbH D – 79346 Endingen www.schurter.com Material Material (Induvidual Part) 2) Stainless Steel Housing (depending on type) Anodized aluminum Polyamide Stainless steel Actuating Area / Insert (with ring illumination) Anodized aluminum Illuminated Ring (with ring illumination) 2) Polyamide When using the switch in a saline or chloric environment, special materials must be used. Items available upon request. Changes that contribute to technical improvement are subject to alternations.
PAGE 7
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.2 2.2.1 Component dimensions M16 Series with Finger Guidance with Pins with Crimp Terminal male with AMP 1) Legend: Lettering: A = Illumination Area B = Actuating Area C = Width Across Flats I = Crimp Terminal male 6.3x0.
PAGE 8
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.2.1.1 Design Possibilities for Housing Geometry: M16 2.2.1.2 Design Possibilities for Actuating Area with finger guidance (standard) without finger guidance (upon request) elevated front design: M19 (standard, others upon request) 2.2.1.3 Connection variants - Wire (Standard: 0.14 mm² / 200 mm wire-length) - Pins (with Connection Terminal 0701.9225) - Crimp Terminal male 6.3 x 0.
PAGE 9
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.2.2 M19 Series with Crimp Terminal male 1) with Pins Cable with Faston, elevated front design Terminal: Crimp Terminal female Ultrafast red 6,3x0,8 Legend: Lettering: A = Illumination Area B = Actuating Area C = Width Across Flats I = Crimp Terminal male 6.3x0.
PAGE 10
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.2.3 M22 Series with Pins with Wire with Crimp Terminal male 1) Point Illumination with Crimp Terminal male For terminal layout see page 14 Legend: Lettering: A = Illumination Area B = Actuating Area C = Width Across Flats I = Crimp Terminal male 6.3x0.
PAGE 11
SCHURTER GmbH D – 79346 Endingen www.schurter.com Ring Illumination with Wires Ring Illumination with Plug Connector Terminal: Molex 22-23-2051 6373 Serie For terminal layout see page 15 Legend: Lettering: A = Illumination Area B = Actuating Area C = Width Across Flats I = Crimp Terminal male 6.3x0.8 - either with/without lettering - position of the connections with respect to the position of the lettering is not defined Changes that contribute to technical improvement are subject to alternations.
PAGE 12
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.2.4 M24 / M27 / M30 Series with Ring Illumination M24 M27 M30 For terminal layout see page 14 Legend: Lettering: A = Illumination Area B = Actuating Area C = Width Across Flats I = Crimp Terminal male 6.3x0.8 - either with/without lettering - position of the connections with respect to the position of the lettering is not defined Changes that contribute to technical improvement are subject to alternations. Page 12 of 24 Date of issue 19.05.
PAGE 13
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.3 Hole Dimensions M16 M24 M19 M27 M22 M30 M22 RI Changes that contribute to technical improvement are subject to alternations. Page 13 of 24 Date of issue 19.05.2008 Author: SHO Date of change: 26.07.11 Changed by: SHO Change No. 10381 Datasheet No. Index 105.9524.
PAGE 14
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.4 Switching Symbols: Illumination Ring Illumination for the M24, M27, M30, 12/24 VDC Series Special Types: 5 VDC Point Illumination Changes that contribute to technical improvement are subject to alternations. Page 14 of 24 Date of issue 19.05.2008 Author: SHO Date of change: 26.07.11 Changed by: SHO Change No. 10381 Datasheet No. Index 105.9524.
PAGE 15
SCHURTER GmbH D – 79346 Endingen www.schurter.com Ring Illumination for the M22, 12/24 VDC Series with Wires Ring Illumination for the M22, 12/24 VDC Series with Quick Connect Terminal Changes that contribute to technical improvement are subject to alternations. Page 15 of 24 Date of issue 19.05.2008 Author: SHO Date of change: 26.07.11 Changed by: SHO Change No. 10381 Datasheet No. Index 105.9524.
PAGE 16
SCHURTER GmbH D – 79346 Endingen www.schurter.com 2.5 Accessories Connection Terminal for version with pins Order number: 0701.9225 Changes that contribute to technical improvement are subject to alternations. Page 16 of 24 Date of issue 19.05.2008 Author: SHO Date of change: 26.07.11 Changed by: SHO Change No. 10381 Datasheet No. Index 105.9524.
PAGE 17
SCHURTER GmbH D – 79346 Endingen www.schurter.com 3 ORDER NUMBERS 3.1 M16 Series Item Number Function Connection Housing Material Housing Color 1241.2350 NO Pins Plastic Red 1241.2351 NO Pins Plastic White 1241.2352 1241.2353 NO NO Pins Pins Plastic Plastic Aluminum natural Black 1241.2411.1 1241.2411.3 NO NO Pins Pins Aluminum Aluminum Gold Red 1241.2411.4 1241.2411.5 NO NO Pins Pins Aluminum Aluminum Blue Green 1241.2411.7 NO Pins Aluminum Black 1241.2411.8 1241.
PAGE 18
SCHURTER GmbH D – 79346 Endingen www.schurter.com 3.3.2 M22 with Point Illumination Item Number Function Connection 1241.3020.M NO Crimp Terminal male Housing Material Aluminum Aluminum natural Red 24 VDC 1241.3047.M NO 1241.3089.M NO Crimp Terminal male Crimp Terminal male Aluminum Aluminum Aluminum natural Yellow Aluminum natural Green 24 VDC 24 VDC 1241.3244.M NO 1241.3166.M NO Crimp Terminal male Crimp Terminal male Aluminum Aluminum Aluminum natural Blue Red Red 24 VDC 24 VDC 1241.
PAGE 19
SCHURTER GmbH D – 79346 Endingen www.schurter.com 3.4.2 M24 Series Item Number Function Connection Housing Material Housing Color Illumination Voltage 1241.3010 1241.3134 NO NO Wire Wire Aluminum Aluminum Red/Green Red/Green 24 VDC 12 VDC 3.4.3 Aluminum natural Aluminum natural M27 Series Item Number Function Connection Housing Material Housing Color Illumination Voltage 1241.3011 1241.3138 NO NO Wire Wire Aluminum Aluminum Red/Green Red/Green 24 VDC 12 VDC 3.4.
PAGE 20
SCHURTER GmbH D – 79346 Endingen www.schurter.com 3.5 Lettering: The last three figures of the order number relate to the type of lettering. 001-074 101- Standard Lettering Customized Lettering Example for ordering with lettering Basic type 1241.3XXX.
PAGE 21
SCHURTER GmbH D – 79346 Endingen www.schurter.com Font Size PSE M16 / M19 / M24 / M30 Individual characters: Height: 5 mm; font: Helvetica normal DIN1451-1E Lettering, max. 3 characters: Height: 3 mm; font: Helvetica normal DIN1451-1E Symbols (Indices 037-052): Height of capital letters: 5 mm; font: True Type, Symbol PSE M22 Individual characters: Height: 5 mm; font: Helvetica normal DIN1451-1E Lettering, max. 3 characters: Height: 5 mm; font: Helvetica normal DIN1451-1E Lettering, max.
PAGE 22
SCHURTER GmbH D – 79346 Endingen www.schurter.com 4 P ACKAGING PSE Switches M16 10 pieces per carton with inlay M19 10 pieces per carton with inlay M22 10 pieces per carton with inlay M24 / M27 / M30 with Ring Illumination Air-cushion bag 1 piece 10 pieces per carton Nuts with sealing rings are packaged separately and are enclosed in the carton. Layer 1 Layer 2 Changes that contribute to technical improvement are subject to alternations. Page 22 of 24 Date of issue 19.05.
PAGE 23
SCHURTER GmbH D – 79346 Endingen www.schurter.com 5 QUALIFICATION TESTS 5.1 IP Protection Class IP Protection Class IEC/DIN/EN 60529 front side IP 67 IP Protection Class DIN 40050-9:1993 front side IP 69K (High-pressure steam jet cleaning test) DIN EN 60068-2-30 Db front side / back side (moist heat (air test with 55°C / 93% humidity) 5.2 IK Protection Class Tested centrically IK Protection Class DIN EN 50102 5.
PAGE 24
SCHURTER GmbH D – 79346 Endingen www.schurter.com 6 APPROV ALS Test Norm Thermal Shock MIL-STD 202F Method 107G High Temperature MIL-STD 810E Method 501.3 Low Temperature MIL-STD 810E Method 502.3 Humidity MIL-STD 810E Method 507.3 Vibration MIL-STD 202F Method 204D Mechanical Shock MIL-STD 202F Method 213B RFI MIL-STD 416D Method RS103 ESD EN 61000-4-2 ( +/-6 kV Kontakt, +/-16 kV Luft) Burst EN 61000-4-4 (+/- 1kV einzeln, +/- 2kV parallel) Surge EN 61000-4-5 ( +/- 1kV unsym.