Datasheet

1
Metal Line Switches
CPS
https://www.schurter.com /PG70
Switches
Capacitive switch
See below:
Approvals and Compliances
Description
- Capacitive touch sensor as momentary push button (NO or NC) or as
latching switch (LA)
- Protection against unintended switching
- Multicolor illumination
- Floating switch connections
- Laser lettering possible
- Vandal resistant
- Wires (8 wires for Multicolor, 4 wires otherwise)²
Unique Selling Proposition
- Variable supply voltage
- Constant LED intensity
- Inputs protected against overvoltage
- Galvanic separated outputs
Characteristics
- Housing made from stainless steel
- Various illumination colors and color combinations possible
- Touch surface made from scratch-resistant ceramics with area illumi-
nation or made from stainless steel with ring illumination
- Ring or area illumination
- Wearless, no moving parts
- Attractive design with or without finger guide available
Weblinks
html-datasheet, General Product Information, CAD-Drawings, Product
News, Detailed request for product, Microsite
Important information
- The CPS is not suitable for use in sanitary or other applications exposed to water or other liquids.
- The housing is connected to gnd.
Technical Data
Electrical Data
Switching Function momentary (NO¹) or latching
Switching Voltage max. 42 VAC␣/ 60 VDC
Switching Current max. 100 mA
Electrical Rating 1 W
Switch Resistance OFF > 10 MΩ
Switch Resistance ON < 16 Ω
Supply Voltage 5 - 28 VDC
Current Consumption all LEDs
off
2.5 mA (switch is open)
␣ 8.5 mA (switch is closed)
Current Consumption 1 LED
on
8.0 mA (switch is open)
␣ 14.0 mA (switch is closed)
Current Consumption 2 LED
on
14.0 mA (switch is open)
␣ 20.0 mA (switch is closed)
Current Consumption 3 LED
on
19.0 mA (switch is open)
␣ 25.0 mA (switch is closed)
Reverse Polarity Protection yes
Short Circuit Protection yes
Output Type OptoMOS Relay
connection type Wires (8 wires for Multicolor, 4 wires
otherwise)²
Mechanical Data
Actuation Type capacitive
Actuating Force none
Shock Protection IK 09
Mounting Depth with Finger Guide: 30.3 mm
␣ without Finger Guide: 30 mm
Tightening Torque Plastic Nut 2.5 Nm
Climatical Data
Operating Temperature -40 to +60 °C
Storage Temperature -40 to +85 °C
IP Protection Class Front Side IP 67 acc. to IEC 60529
Salt Spray Test (acc. to DIN
50021-SS)
24 h / 48 h / 96 h Residence Time
Material
Housings Stainless Steel
Actuator Area Illumination: Ceramics
␣ Ring Illumination: Stainless steel
Illuminated Ring (Ring Illumi-
nation)
PMMA
Seal Ring NBR70
¹ on request also available as NC / ² on request also available with cable or connector
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals