Datasheet

ManualsBrandsSchurter ManualsFiltersDD12 Power Inlet with Filter 6 A

Power Entry Modules with Line Filter

DD12

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole

Screw-on mounting horizontal (version B)

Order required accessories separately

Screw-on mounting vertical (version A) Snap-in mounting

See below:

Approvals and Compliances

C14

70° C

Description

- Panel mount :

Screw-on from front side

- 4 Functions :

Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder for

fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medical

version

- V-Lock notch standard

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- Various mounting options

- Attractive flat design

- Switch for highest inrush current

- V-Lock cord retaining

Characteristics

- Ultra-compact design. Ideal for low profile designs

Aluminum case provides good shielding

- All single elements are already wired

- Fuse drawer meets requirements of medical standard IEC/EN 60601-1

- Ideal for application with high transient loads

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- Solder terminals

- Fuse drawer 1-pole, plus spare fuse case

- Fuse drawer 2-pole, with shorting bar

- Other rocker marking

- Line switch, illuminated

- Line switch 1-pole

- Medical version M80

- Class X1- and Y1-capacitors for enhanced withstand voltage

References

Alternative: version without line filter DD11

Alternative: version for snap-in mounting KMF

Alternative: version with 2-stage filter DD14

Weblinks

pdf data sheet, html data sheet, General Product Information,

Distributor-Stock-Check, Accessories, Detailed request for product,

Landing Page

Technical Data

Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA 1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category 25/085/21 acc. to IEC 60068-1

IP-Protection from front side IP40 acc. to IEC 60529

Protection Class Suitable for appliances with protection

class I acc. to IEC 61140

Terminal Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S Screw-on mounting: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 1 mm to 3 mm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 acc. to IEC 60320-1

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I

Fuseholder 1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per

pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Switch Rocker switch 2-pole, non-illuminated,

acc. to IEC 61058-1

Technical Details

Line Filter Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF > 2'000'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Summary of content (9 pages)

PAGE 1
DD12 Power Entry Modules with Line Filter https://www.schurter.
PAGE 2
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards.
PAGE 3
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
PAGE 4
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw version B 9.8 51 3. 5 R 3 3. 4/ M 29.8 ±0.10 37 ±0.15 PE N 12 37 47 L ±0 .5 90° 3.25 49.3 ±0.10 3.4 5.9 55 1.3 15.1 Snap-in mounting from front side 49.3 ±0.10 9.8 56.5 15.1 4 1.3 EMC Products 4.4 5± 3. R 29.5 ±0.10 PE N 12 32.5 L 0.
PAGE 5
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductance L1/ L2 [mH] Inductance L3 [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 10 - 100 2.2 1 2 Standard Version 2x4 - 100 2.2 1 4 Standard Version 2 x 1.5 - 100 2.2 1 6 Standard Version 2 x 0.8 - 100 2.2 1 8 Standard Version 2 x 0.6 - 100 2.2 1 10 Standard Version 2 x 0.3 - 100 2.
PAGE 6
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1A 2A 8A 10 A 4A 6A 4A 6A Medical version (M5) 1A 2A 8A 10 A All Variants Rated Current [A] Filter-Type Mounting Fuseholder Line Switch Illumination Color Order Number 1 Standard Version Screw-on A 1-pole 2-pole non-illuminated black DD12.1111.
PAGE 7
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current [A] Filter-Type Mounting Fuseholder Line Switch Illumination Color Order Number 4 Standard Version Screw B 2-pole 2-pole non-illuminated black 3-109-957 4 Standard Version Screw-on A 2-pole 2-pole non-illuminated black DD12.4121.
PAGE 8
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, A 4700.
PAGE 9
DD12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS 27.02.2019 Power Cord further types to DD12 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable.