Datasheet

ManualsBrandsSchurter ManualsFiltersPower Inlet with Line Filter and TA35 Circuit Breaker 15 A 250VAC

Table Of Contents

DG12

Power Entry Modules with Line Filter

DG12

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter, Circuit Breaker TA35 (recessed)

Screw-on with IP67 Screw-on A Screw-on B

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel mount :

Screw-on or snap-in mounting from front side

- 3 Functions :

Appliance Inlet protection class I or II , Circuit breaker type TA35 2-pole

, Line filter in standard and medical version

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- IP67 protection

- Recessed rocker switch

- Various mounting options

- V-Lock cord retaining

Characteristics

- All single elements are already wired

- Circuit Breaker non-illuminated or illuminated

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- Other rocker marking

- Medical version M80

- Capacitance CX1

- Variants in white

- Filter version with high inductance

References

Alternative: version without line filter DG11

Weblinks

pdf data sheet, html data sheet, General Product Information,

Distributor-Stock-Check, Accessories, Detailed request for product,

Landing Page

Technical Data

Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA 1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 60 °C

Climatic Category 25/060/21 acc. to IEC 60068-1

IP-Protection from front side IP40 or IP65 / IP67 acc.

to IEC 60529

Protection Class Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S Screw: max 8 mm

Mounting screw torque max 0.5 Nm

: S =1.0/1.2/1.5/2.0/2.5/3.0 mm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 C18 acc. to IEC 60320-1

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I or II

Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA

22.2 no. 235

2-pole rocker switch, illuminated or non-

illuminated. Optional with undervoltage-

or remote trip release

Short circuit capacity Icn:

2000 A

Line Filter Standard and Medical Version, IEC

60939, UL 60939-3, CSA C22.2 no. 8

Technical Details

MTBF > 100'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.

Summary of content (12 pages)

PAGE 1
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Circuit Breaker TA35 (recessed) Screw-on with IP67 C14 Screw-on A Screw-on B C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Screw-on or snap-in mounting from front side - 3 Functions : Appliance Inlet protection class I or II , Circuit breaker type TA35 2-pole , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.
PAGE 2
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
PAGE 3
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Snap-in version (81.6) 35 5.35 30 5.65 ±0.10 28.3 59 63 +0.20 0 16 48.3 ma x. R R1.5 S 3 +0.10 0 78.3 3.3 Screw-on A (81.6) .5 R1 5.35 5.65 48.3 66 ±0.10 59 35 1.2 78.3 ø 3.4 / M3 m ø 3.4 ax .R 3 ø 6.2 28.3 76 66 +0.20 0 16 30±0.10 3.3 Screw-on B (81.6) 5.65 38 ±0.10 59 28.3 63 ø 6.2 16 5.35 +0.20 0 48.3 ø 3.4 / M3 38 3 30 ±0.10 .R ax 1.5 78.3 m 1.
PAGE 4
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw-on with IP67 +0.20 0 38 ±0.10 ø 3.4 16 34.3 ±0.10 28.3 68 38 5.65 59 5.35 50.3 ø 3.4 / M3 (81.6) 51 1.7 78.3 3 .R ax m 42 ±0.10 42 3.3 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 12 220 2.2 1 2 Standard Version 2 x 5.2 220 2.2 1 3 Standard Version 2x4 220 2.
PAGE 5
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1A 2A 3A 4A 6A 8A 10 A 15 A 1A 2A 3A 4A 6A 8A 10 A 15 A Medical version (M5) Effect of ambient temperature Ambient Temperature [°C] Correction factor -30 0.76 -20 0.81 0 0.90 +23 1.00 +40 1.03 +50 1.04 +60 1.
PAGE 6
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Time-Current-Curves Tripping Characteristics In ≥ 3 ... ≤ 15 A Tripping Characteristics In < 3 A [ min ] [ sec ] 10'000 60 30 20 10 [ min ] [ sec ] 10'000 Typ p TA35 <3 A (TC-1,TC-2) Nennstrom Umgebungstemp.
PAGE 7
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Configuration Code Type Configuration Code TA35 DG12 - CBDWM10 0C0-0 0 0-C6135 - X X X - X X X X - 0 0 Customer specific type Color 0 1 Black White 3) Panel Mounting 00 Screw version A front mounting 01 Screw version B front mounting 10 Snap-in 1.0 mm 12 Snap-in 1.2 mm 15 Snap-in 1.5 mm 20 Snap-in 2.0 mm 25 Snap-in 2.5 mm 30 Snap-in 3.
PAGE 8
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Configuration Code Type Configuration Code TA35 DG12 - CBDWM10 0C0-0 0 0-C6135 - X X X - X X X X - 0 0 Customer specific type Color 0 1 Black White 3) Panel Mounting 00 Screw version A front mounting 01 Screw version B front mounting 10 Snap-in 1.0 mm 12 Snap-in 1.2 mm 15 Snap-in 1.5 mm 20 Snap-in 2.0 mm 25 Snap-in 2.5 mm 30 Snap-in 3.
PAGE 9
DG12 Power Entry Modules with Line Filter https://www.schurter.
PAGE 10
DG12 Power Entry Modules with Line Filter https://www.schurter.
PAGE 11
DG12 Power Entry Modules with Line Filter https://www.schurter.
PAGE 12
DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS 21.03.2019 Power Cord further types to DG12 12 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments.