Datasheet

ManualsBrandsSchurter Manuals7.4 x 3.1SMD Fuse, 7.4 x 3.1mm, 1A, 125V, 125V Quick Acting F

Table Of Contents

OMF 125

Fuses

OMF 125

https://www.schurter.com /PG01_2

Fuses

Surface Mount Fuse, 7.4 x 3.1 mm, Quick-Acting F, 125 VAC, 125 VDC

Exemplary part photo depending on

part no.

See below:

Approvals and Compliances

UL 248-14 · 125 VAC · 125 VDC · Quick-Acting F

Description

- Directly solderable on printed circuit boards

References

Packaging Details

Corresponding Fuseholder OMH 125

Assembled Fuseholder OMK 125

Fuse Kit Fuse Kit OMF

Weblinks

pdf datasheet, html-datasheet, General Product Information, Packaging

details, Distributor-Stock-Check, Detailed request for product

Technical Data

Rated Voltage 125 VAC, 125 VDC

Rated current 0.063 - 10 A

Breaking Capacity 100 A

Characteristic Quick-Acting F

Mounting PCB,SMT

Admissible Ambient Air Temp. -40 °C to 125 °C

Climatic Category 40/85/21 acc. to IEC 60068-1

Material: Housing Thermoplastic, UL 94V-0

Material: Terminals Tin-Plated Copper Alloy

Unit Weight 0.08 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking , Type, Rated current, Approvals

Soldering Methods Reflow, Wave

Soldering Profile

Solderability 245 °C / 3 sec acc. to IEC 60068-2-58,

Test Td

Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-58,

Test Td

Load Humidity Test MIL-STD-202, Method 103B

0.1 x In @ 0.85 r.H. @ 85°C

Moisture Resistance Test MIL-STD-202, Method 106E

(50 cycles in a temp./mister chamber)

Terminal Strength MIL-STD-202, Method 211A

(Deflection of board 1 mm for 1 minute)

Case Resistance acc. to EIA/IS-722, Test 4.7

>100 MΩ (between leeds and body)

Mechanical Shock MIL-STD-202, Method 213B

(Shock 50g, half sine wave, 11 ms)

Vibration, High Frequency MIL-STD-202, Method 204D

Shock 20 gn, 20 min, 10-2 kHz, 12 cyc.

Resistance to Solvents MIL-STD-202, Method 215A

Flammability min. UL 94V-1

(acc. to EIA/IS-722, Test 4.12)

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: OMF 125

Approval Logo Certificates Certification Body Description

UL Approvals UL UL File Number: E41599

Summary of content (5 pages)

PAGE 1
OMF 125 Fuses https://www.schurter.com /PG01_2 Surface Mount Fuse, 7.4 x 3.1 mm, Quick-Acting F, 125 VAC, 125 VDC Exemplary part photo depending on part no.
PAGE 2
OMF 125 Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment.
PAGE 3
OMF 125 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 100000 ≤ 5A 6.3 A – 8A 10000 10 A 1000 Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 Multiple of Rated Current In All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.063 125 125 0.063 125 125 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.0 In typ. [mW] Melting I²t 4.0 In typ. [A²s] Order Number 1) 2550 160 0.00011 l 3404.0003.11 1) 2550 160 0.00011 l 3404.
PAGE 4
OMF 125 Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.63 125 125 0.63 125 0.75 125 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.0 In typ. [mW] Melting I²t 4.0 In typ. [A²s] 1) 290 180 0.02 l 125 1) 290 180 0.02 l 3404.0008.24 125 1) 260 200 0.031 l 3404.0046.11 Order Number 3404.0008.22 0.75 125 125 1) 260 200 0.031 l 3404.0046.22 0.75 125 125 1) 260 200 0.031 l 3404.0046.
PAGE 5
OMF 125 Fuses https://www.schurter.com /PG01_2 .xx = .11 Plastic Bag (100 pcs.) .xx = .22 Blister Tape 18 cm Reel (750 pcs.) .xx = .24 Blister Tape 33 cm Reel (3000 pcs.) 26.02.2018 Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable.