Datasheet

ManualsBrandsSchurter Manuals3.2 x 1.6 (1206)SMD Fuse, 3.2 x 1.6mm, 25A, 32V, 63V Time Lag T

Fuses

UST 1206

https://www.schurter.com /PG01_2

Fuses

SMD Fuse, 3.2 x 1.6 mm, Time-Lag T, 32 VAC, 63 VDC

Exemplary part photo depending on

part no.

See below:

Approvals and Compliances

UL 248-14 · 32 VAC · 63 VDC · Time-Lag T

Description

- UL characteristic

- High melting I²t-values

- High current ratings up to 25 A

- Impermeable to potting compound

Applications

- Secondary Protection DC and AC

- Circuits with inrush

- LCD Backlight DC-AC Inverter

References

Packaging Details

Weblinks

pdf datasheet, html-datasheet, General Product Information, Packaging

details, Distributor-Stock-Check, Detailed request for product, Microsite

Technical Data

Rated Voltage 32 VAC, 63 VDC

Rated current 7 - 25 A

Breaking Capacity 100 A - 600 A

Characteristic Time-Lag T

Mounting PCB,SMT

Admissible Ambient Air Temp. -55 °C to 90 °C

Climatic Category 55/090/21 acc. to IEC 60068-1

Material: Housing Epoxyd Glass, UL 94V-0

Material: Terminals Copper, Ni/Au-plated

Unit Weight 0.006 g

Storage Conditions 0 °C to 60 °C, max. 70% r.h.

Product Marking Letter (see variants)

Soldering Methods Reflow

Soldering Profile

Solderability 245 °C / 3 sec acc. to IEC 60068-2-58,

Test Td

Resistance to Soldering Heat 260 +0/-5 °C / 30 sec acc. to IPC/JE-

DEC J-STD-020D, Level 1

Moisture Resistance Test MIL-STD-202, Method 106E

(50 cycles in a temp./mister chamber)

Terminal Strength MIL-STD-202, Method 211A

(Deflection of board 1 mm for 1 minute)

Case Resistance acc. to EIA/IS-722, Test 4.7

>100 MΩ (between leeds and body)

Resistance to Solvents MIL-STD-202, Method 215A

Flammability UL 94V-1

(acc. to EIA/IS-722, Test 4.12)

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: UST 1206

Approval Logo Certificates Certification Body Description

UL Approvals UL UL File Number: E41599

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses

Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses

Application standards

Application standards where the product can be used

Summary of content (4 pages)

PAGE 1
UST 1206 Fuses https://www.schurter.com /PG01_2 SMD Fuse, 3.2 x 1.6 mm, Time-Lag T, 32 VAC, 63 VDC Exemplary part photo depending on part no.
PAGE 2
UST 1206 Fuses https://www.schurter.com /PG01_2 Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
PAGE 3
UST 1206 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 10000 1000 7A 100 8A 10 A 12 A Time in Seconds 10 15 A 20 A 1 25 A 0.1 0.01 0.001 0.0001 1 10 100 1000 Current in Amperes All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Marking Breaking Capacity Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 8.0 In typ. [A²s] Order Number 7 32 63 mm 1) 73 8.7 8.7 l 3413.0326.22 7 32 63 mm 1) 73 8.7 8.7 l 3413.0326.
PAGE 4
UST 1206 .xx = .22 Blister Tape 18 cm Reel (1000 pcs.) .xx = .24 Blister Tape 25.4 cm Reel (5000 pcs.) .xx = .26 Blister Tape 33 cm Reel (15000 pcs.) 06.09.2018 Packaging Unit Fuses https://www.schurter.com /PG01_2 4 Fuses The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable.