Datasheet

ManualsBrandsSchurter ManualsConnectorsPlug C14 Faston 4.8 x 0.8 mm 10 A/250 VAC Black Snap-In L + N + PE

Power entry modules without line filter

KEA

www.schurter.com/pg05

Connectors

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole

KEA KEA

Plug removal necessary for fuse

replacement

C14

70° C

Description

- Panel Mount:

Screw-on version from front or rear side, snap-in version from front

side

- 3 Functions:

Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm

1- or 2-pole, with or without voltage selector (step switch)

- Quick connect terminals 4.8 x 0.8 mm

- Alternative: version with line filter

KFA

Approvals

- VDE License Number: 40012272

- UL License Number: E93617

- CSA License Number: 38456

Characteristics

- Available with or without internal connections

- Plug removal necessary for fuse-link replacement

The fuse drawer "Fingergrip" can be removed by hand

For added safety "Extra-Safe" fuse drawers are available

Fuse drawer meets requirements of medical standard IEC/EN 60601-1

The fuseholder is accessible from the equipment front

- Qualified for use in equipment according IEC/EN 60950

Other versions on request

- With solder terminals

- Fuse drawer with other voltage values

- For protection class II

References

General Product Information

Weblinks

Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,

SCHURTER-Stock-Check, Distributor-Stock-Check

Technical Data

Ratings IEC 10 A / 250 VAC; 50 Hz

Ratings UL/CSA 10 A / 250 VAC; 60 Hz

Dielectric Strength > 3 kVAC between L-N

> 4 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Temp. -25 °C to 70 °C

Degree of Protection from front side IP 40 acc. to IEC 60529

Protection Class Suitable for appliances with protection

class 1 acc. to IEC 61140

Terminal Quick connect terminals 4.8 x 0.8 mm

Panel Thickness s Screw: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 1.5/ 2/ 2.5 mm

Material: Housing Thermoplastic, black, UL 94V-0

Appliance Inlet C14 acc. to IEC/EN 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class 1

Fuseholder 1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per

pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at hig-

her ambient temperature see derating

curves

Voltage Selectors optional, step, 2-4 digits

Summary of content (4 pages)

PAGE 1
KEA Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole KEA Plug removal necessary for fuse replacement KEA C14 70° C Description - Panel Mount: Screw-on version from front or rear side, snap-in version from front side - 3 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole, with or without voltage selector (step switch) - Quick connect terminals 4.8 x 0.
PAGE 2
KEA Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw-on mounting type KEA 44 mm Snap-in mounting type KEA 2 2.2 4.8x0.8 41.4 27.5 S ±0.1 41.4 18 ø 3.2 27.5 4.8x0.8 M3/ø3.6 0 36 R2.5-0.2 27.5 R2.5 +0.2 0 +0.2 0 31.5 31.5 34 31.2 +0.2 0 230 R6 27.2 R4 230 36 R2.5 34 27.2 R4 ±0.1 31.2 18 4 2.2 2 ø 6.3x90˚ 0 30 R2.5-0.2 27.5 +0.
PAGE 3
KEA Power entry modules without line filter www.schurter.com/pg05 Variants Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store Fingergrip and Extra-Safe Fuse drawer must be ordered separately Type Panel mounting Panel Thickness s [mm] Fuseholder Voltage Selectors Internally wired KEA Screw - KEA Screw - KEA Screw KEA 1-pole 3 pos. l 1-pole 3/4 digits - 1-pole without l 4301.0521 Screw - 2-pole 3 pos. l 4301.
PAGE 4
KEA Power entry modules without line filter www.schurter.com/pg05 Accessories Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.