Datasheet

ManualsBrandsSchurter ManualsFiltersPower Inlet with Filter 6 A 250 V

Power Entry Modules with Line Filter

5200

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter, Fuseholder 1-pole

Type 5200, Fuseholder 1-pole with spare com-

partment

Screw-On Version

Type 5200, Fuseholder 1-pole with spare com-

partment

Snap-In Version

Approvals and Compliances

C14

70° C

Description

- Panel Mount :

Snap-in or screw-on mounting from front side

- 3 Functions :

Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm

1-pole , Line filter in standard and medical version

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- Ultra-compact design

- Recessed faston connectors

- High quality filter case made of stainless steel

- Highly resistant since potted filter

Characteristics

- All single elements are already wired

- Plug removal necessary for fuse-link replacement

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- Variants with V-Lock cord retaining

References

Alternative: version without line filter 6200

Alternative: Standard version

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product

Technical Data

Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz

Leakage Current standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category 25/085/21 acc. to IEC 60068-1

IP-Protection from front side IP 40 acc. to IEC 60529

Protection Class Suitable for appliances with protection

class I acc. to IEC 61140

Terminal Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S Screw: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 0.8 mm to 3 mm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I

Fuseholder 1-pole, Shocksafe category PC2 acc. to

IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2 W (1 pole)

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Filter Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF > 2'300'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

Summary of content (6 pages)

PAGE 1
5200 Power Entry Modules with Line Filter https://www.schurter.
PAGE 2
5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
PAGE 3
5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting type 5200 2.5 34 43.7 32 5 36 +0.50 0 max.R3 29 ø 6.3x90˚ 44 36 ø 3.5 M3 +0.2 0 Snap-in mounting type 5200 32 5 43.7 34 29 36 max.R3 +0.20 0 3.5 +0.20 0 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 11 47 2.2 - 2 Standard Version 2x4 47 2.
PAGE 4
5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams 5200 Standard version 5200 Medical version L L’ F1 L Cy 1) PE Cx L2 N L’ F1 L1 Cy 1) Line 2) Load PE’ 2) 1) PE N’ L1 Cx PE’ 2) R L2 N N’ 1) Line 2) Load Derating Curves 1-pole Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.
PAGE 5
200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Medical version (M5) 1A 2A 8A 10 A 4A 6A All Variants Rated Current [A] Filter-Type Panel mounting Fuseholder Order Number 1 Standard Version Snap-in 1-pole 5200.0143.1 █ 2 Standard Version Snap-in 1-pole 5200.0243.1 █ 4 Standard Version Snap-in 1-pole 5200.0443.1 █ 6 Standard Version Snap-in 1-pole 5200.0643.1 █ 8 Standard Version Snap-in 1-pole 5200.0843.
PAGE 6
5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Accessories Description Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Countersunk, B 4700.