Datasheet

1
1-Phase Line Filters
FMEB
https://www.schurter.com /PG84
EMC Products
DC-Filter, single pole
Approvals and Compliances
Description
- Line-filter in standard version
- 1-stage
- standard attenuation
Characteristics
- Optimized for DC supplied applications
- Suitable for use in equipment according to IEC/UL 60950
Other versions on request
- Other terminal combinations
- Version with wire connection
References
Alternative: Standard version
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Detailed request for product, Microsite
Technical Data
Ratings IEC 5 - 30 A @ Ta 40 °C / 43/80 VDC
Ratings UL/CSA 5 - 30 A @ Ta 40 °C / 43/80 VDC
Dielectric Strength > 1.7 kVDC between Vss-GND
> 2.7 kVDC between Vss/GND-PE
Test voltage (2 sec)
Allowable Operation Tempe-
rature
-25 °C to 100 °C
Climatic Category 25/100/21 acc. to IEC 60068-1
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect and screw terminals
Material: Housing Aluminum, UL 94V-0
Line Filter Industrial Version, IEC 60939, UL 1283,
CSA C22.2 no. 8
Technical Details
MTBF > 200'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: FMEB
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40021953
UL Approvals UL UL File Number: E72928