Datasheet

1
Fuseholder Blocks & Clips
CQP
https://www.schurter.com /PG02
Fuses
Heavy Duty Fuse Clip, 6.3x32 mm, 600 VAC/VDC, 32 A
Solder THT version tin-plated Solder THT version silver-plated
See below:
Approvals and Compliances
600 VAC/DC · 32 A (UL)
Description
- Solder mounting
Unique Selling Proposition
- Unique 600 VAC/VDC and 32 A
- Minimal power loss due to strong clamping force
Applications
- Photovoltaic
- Applications for high currents and voltages
- Equipment with three-phase supply (400 VAC)
References
Fuseholder to A12FA 660V; FSF 6.3x32; FST 6.3x32; SA
6.3x32; SHF 6.3x32; SHT 6.3x32; SP 6.3x32; SPT 6.3x32; SUT
6.3x32
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Distributor-Stock-Check, Detailed request for product, Microsite
Technical Data
Fuse-Link 6.3 x 32 mm
Mounting PCB
Terminal Solder THT
Rated Voltage 600 VAC/DC
Rated current 32 A (UL)
Admissible Ambient Air Temp. -55 °C to 155 °C ¹⁾
Material: Terminals Copper alloy, silver-plated / tin-plated ¹⁾
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Soldering Methods Wave
Soldering Profile
Solderability 245 °C / 3 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
Contact Resistance ≤ 10 mΩ at 20 mV
1)
Details see table of variants
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: CQP
Approval Logo Certificates Certification Body Description
UL Approvals UL UL File Number: E39328
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to UL 4248-1 Fuseholder general requirements
Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements