Datasheet

ManualsBrandsSchurter ManualsConnectorsPlug C14 Faston 4.8 x 0.8 mm 10 A/250 VAC Black Snap-In

Table Of Contents

Power entry modules without line filter

https://www.schurter.com /PG05

Connectors

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole, Line Switch 2-pole and Voltage Selector

Order required accessories separately

See below:

Approvals and Compliances

C14

70° C

Description

- Panel mount :

Screw-on version from front or rear side, snap-in version from front

side

- 4 Functions :

Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder with

interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm

, with or without voltage selector (step)

- V-Lock notch standard

- Meets the requirements of IEC 60335-1 for appliances in unattended

use. This includes the enhanced requirements of glow wire tests acc.

to IEC 60695-2-12 and -13.

- Quick connect terminals 4.8 x 0.8 mm

Characteristics

- All single elements are already wired

- The fuse drawer ?Fingergrip? can be removed by hand

- Suitable for use in equipment according to IEC/UL 60950

Other versions on request

- Line switch, illuminated

- Line switch with other rocker marking

- Line switch 1-pole

- For protection class II (without CCC approval)

References

Alternative: version with line filter CD

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Technical Data

Ratings IEC 10 A / 250 VAC; 50 Hz

Ratings UL/CSA 10 A / 125 VAC; 60 Hz

Dielectric Strength > 3 kVAC between L-N

> 4 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection from front side IP 40 acc. to IEC 60529

Insulation cover Suitable for appliances with protection

class I acc. to IEC 61140

Terminal Quick connect terminals 4.8 x 0.8 mm

, tin-plated

Panel Thickness S Screw: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 1.5/2/2.5 mm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I

Fuseholder 1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 or 6.3 x 32 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per

pole

6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole)

per pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Switch Rocker switch 2-pole, non-illuminated,

acc. to IEC 61058-1

Technical Details

Voltage Selector optional, step, 2-4 digits

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: KD

Summary of content (6 pages)

PAGE 1
KD Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole, Line Switch 2-pole and Voltage Selector Order required accessories separately C14 See below: Approvals and Compliances 70° C Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side - 4 Functions : Appliance Inlet Protection class I , Line Switch 2‑pole , Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.
PAGE 2
KD Power entry modules without line filter https://www.schurter.
PAGE 3
KD Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 30 55 M3/ø 3.6 R6 R 4.5 75.5 ±0.15 +0.2 66.5 0 66.2 83.5 75.5 230 ø 6.3x90° ø 3.2 4.8x0.8 0 R 3 -0.2 18 R 3.1 2 2.2 27.5 27.2 27.5 +0.2 0 Snap-in mounting 30 55 R 4.5 S ±0.1 69 66.2 66.5 0 +0.2 230 4.8x0.8 0 R 3 -0.2 18 R 3.1 27.5 27.2 2 2.2 27.5 +0.
PAGE 4
KD Power entry modules without line filter https://www.schurter.com /PG05 Derating Curves Fuses 5 x 20 mm (1-pole) Fuses 5 x 20 mm (2-pole, per pole) 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 40 60 80 100 Ambient air temperature Ta °C Fuses 6.3 x 32 mm (2-pole, per pole) 3.15 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.
PAGE 5
KD Power entry modules without line filter https://www.schurter.com /PG05 Required Accessory Description Fusedrawer 3 Fusedrawer for Fuse Links 5x20 mm resp. 6.3x32 mm Fingergrip, 5 x 20, 2-pole, Voltage Selector 4303.2014.00 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 100, 120, 220, 240 4303.2014.01 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 150, 220 4303.2014.02 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 220 4303.2014.03 ...
PAGE 6
KD Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS 11.09.2018 Power Cord further types to KD 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable.