HA101 GATEWAY HOME AUTOMATION CONTROL CENTER Mo tio per Tem n Light USER MANUAL re atu Dimming Blinds Smoke od Ra di Flo ato r SCHWAIGER HOME
Congratulations and thank you for purchasing the HA101 Schwaiger Product. The following product description will provide you with useful information about its use. ATTENTION ! Note regarding the integration of a new Gateway: In order to add the Gateway to your account, please use the password and the security ID given on page 33 of this user manual. Internet: www.schwaiger.
TABLE OF CONTENTS 1 PRODUCT DESCRIPTION...................................................................................... 4 2 HA101 GATEWAY ................................................................................................. 5 3 TECHNICAL INFORMATION.................................................................................. 6 4 CONFIGURING THE SCHWAIGER HOME SYSTEM .................................................. 6 4.1 CONNECTING THE GATEWAYS TO HOME NETWORK........................
1 PRODUCTION DESCRIPTION The Schwaiger Home app is a complete solution for intelligent living, which uses a variety of communications options for controlling household equipment. Access to the home system is assured through the use of cloud services and the user-friendly mobile control interface. Cloud Overview of the Schwaiger Home network Please Notice! The Schwaiger application is constantly being further developed and improved.
2 HA101 GATEWAY The HA101 gateway is the device that provides support for the home automation (HA) features. The gateway can control all of the home automation devices in the user’s home, such as the alarms, thermostats and more. The gateway will control devices that support one of the following communication protocols: Z-Wave, ZigBee. It can query the status of the device in the home network and save it, as well as change the status and all configuration options.
3 TECHNICAL INFORMATION Hardware Specifications • Electrical: ~100-240 V, 0.6 A, 50/60 Hz (only inside the home, up to a max. of 40° C) • Gateway connections using Ethernet and WLAN • Sensor connections using the Z-Wave and ZigBee protocols • LED-illuminated button for configuring devices • Status LED (dimmable) • USB port for (no function) 4 CONFIGURING THE SCHWAIGER HOME SYSTEM Configuring the Schwaiger Home system consists of four basic steps. 1. Connecting the gateways to the home network 2.
Additional account and personal information will be entered as part of following those instructions. Entry of all information regarding the account details is optional. It may be changed at any time. The asterisk (*) indicates mandatory entries. Upon completion, the account registration information will be sent to the cloud service. Once the user name and password have been validated, an activation link will be sent to the user by email. It may be several minutes before that email message arrives.
In this step, the user can add new devices by tapping the Find Devices button. This action will place all networks in a mode, which can add devices. Read the operating instructions for the selected components to do so. From the same screen, devices can be removed by tapping the device and holding it for a longer time, and then selecting the Delete option (regarding this, see the respective operating instructions). Z-Wave devices that have not been removed from the previous network must be removed first.
Re-start the network This function will permit the user to reset the network connection settings to factory settings. Once the network has been restarted, the gateway will be restarted. Once the network cable has been connected to the gateway after the network has been restarted, it will continue to use the network connection. If the network cable has not been connected to the gateway, the gateway will enter Access Point mode.
5 CLIENT APPLICATION MANUAL 5.1 ACCOUNT MANAGEMENT 5.1.1 Creating a new account Ill. 1 Ill. 2 1. Tap the Create New Account button on the login dialog (see Ill. 1) 2. Enter a valid email address and the password on the login dialog. An activation link will be sent to the specified email address (see Ill. 2) 3. Agree with the General Business Terms and Conditions and Data Protection Provisions and tap the button .
Ill. 3 Ill. 4 4. Enter the account details and tap the button. Entries indicated by an asterisk (*) are mandatory entries. All other entries can also be filled in later (see Ill. 3) 5. Enter the your personal information and tap the (see Ill. 4) button to close the wizard 6. Once the account has been successfully registered, a message with an activation link will be sent to the email address specified in the account name (make sure to check the Spam folder).
5.1.2 Updating account information Ill. 5 Ill. 6 1. To update the user account information, tap the user icon in the upper right corner of the main menu and select the Account Settings option. 2. The Account Settings wizard will be started. 3. The password for the account can be changed in the first step. To continue changing account details, tap the button.
Ill. 7 Ill. 8 4. Information about the account details can be changed in the second step. All of the entries are optional. To continue to the third step for updating personal information, tap the button. 5. Personal information can be updated in the third step. All of the entries indicated with an asterisk (*) are mandatory fields. All other entries are optional. 6. Tap the button to complete the Account Settings wizard process.
5.2 HOME CONFIGURATION 5.2.1 Adding a gateway to the account Ill. 9 Ill.
Ill. 11 Each account can register more than one gateway. Follow these steps to add a gateway. 1. Log into the account that should register the new gateway. 2. Select the Home Installation menu option to open a list of the gateways associated with the account (see Ill. 9) 3. Tap the Add Gateway option in the upper right corner to start the Home Installation wizard (see Ill. 10) 4. A gateway can be added to the account in the Add Gateway step. 5.
5.2.2 Removing a gateway from an account Ill. 12 Ill. 13 Follow these steps to remove a gateway properly. 1. Start the mobile app. 2. Select the Home Installation menu option to open a list of the gateways associated with the account. 3. Find the gateway in the list and tap the gateway button and hold it until the options menu is displayed. 4. Select the Delete option. 5. Confirm execution.
5.2.3 Home installation Ill. 14 Configuration of the home network uses the Home Installation wizard, as explained in 5.2.1. The home gateway must be in the same network as the smartphone or tablet. The home assignments and device management can be configured using the following options. Ill. 15 1. login to the account, to which the gateway was added. 2. Select the Home Installation menu option to open a list of the gateways associated with the account. 3.
5.2.4 Device management Ill. 16 Ill. 17 To add a new device, follow Steps 1 through 9 from Section 5.2.3 to open the Home Installation wizard. To continue directly with the device configuration step, select the Find Devices option, as described in Section 5.2.4.1. In that manner, new devices can be added, existing devices removed, devices from the previous network removed, network switch settings made and device names and locations managed.
Ill. 18 Ill.
5.2.4.1 Adding a new device Please note, that the distance between the gateway and the clients shall not be more than 0.5 meters during integrating in/excluding from the network. 1. To add a device, tap the Find Devices button. This action will open a new window for integrating the device. The counter in the window will display the amount of time until the network will be closed again. 2. Integrate the device. This process may vary from device to device. Read the manual for the device.
5.2.4.6 Setting the timeframe for registration & deregistration 1. Open the Settings menu from the Device Configuration screen in the upper right corner and select Deactivate Network. 2. When the dialog is displayed, enter the descried timeframe for the duration in seconds. 3. Tap the OK button to confirm this action. 5.3 CONTROLLING DEVICES 5.3.1 Controlling devices by type Ill. 20 1. Select the Device by Type option on the application’s main menu. 2.
5.3.2 Controlling devices by location Ill. 21 1. Select the Device by Location option on the application’s main menu. 2. To filter devices by type, choose a location from the menu on the left. 3. To release the filter, tap the home icon in the upper left corner. 4. In addition to filtering by type, a filter by location may also be applied, by choosing the device type using the option in the upper right corner. 5.
5.3.3 Advanced device configuration Ill. 22 b 1. Select the Device by Type or Device by Location options on the application’s main menu. 2. Find the device and tap the device button and hold it to open the Advanced Device Configuration dialog. 3. Each change to the device properties will be immediately applied to the gateway and the device. 5.3.4 Special features Z-Wave components can be linked to an ID number and scenarios can be created, without the gateway being accessible.
5.4.1 Creating New Scenarios Ill. 23 Ill. 24 1. To open the Scenario Configuration screen, tap the Scenarios option on the main application screen. 2. Tap the Add Scenario option in the upper right corner on the Scenario Configuration screen.
Ill. 25 Ill. 26 Adding triggers 3. To add a new device trigger to a scenario, tap the Add option in the upper right corner (see Ill. 23) and select the device or time trigger. a. On the Device Trigger dialog, choose the drive function that should activate the scenario. b. Choose one of the three options: Equals, Less than or Greater than. c. Set the value.
4. To add a new time trigger to a scenario, tap the Add option in the upper right corner (see Illustration 23) and choose the Time Trigger option. a. Select the activation time on the Time Trigger dialog. b. Tap the option button, if a one-time event is desired. In that case, choose the date when the event should occur. c. If the event should repeat, select the Weekly option button and the weekdays when the scenario should be executed (see Illustration 26). 5. To add the trigger, tap the OK button. 6.
4. Select the Scenarios option from the main menu to open a list of available scenarios. 5. Tap the scenario button and hold it to open the options menu. Select the Edit option. 6. A wizard will be opened. Follow steps 3 through 13 from Section 5.4.1. 5.4.4 Deleting a scenario 1. Select the Scenarios option from the main menu to open a list of available scenarios. Ill. 27 2. Tap the scenario button and hold it to open the options menu. Select the Delete option (see Ill. 27). 3. Confirm execution. 5.4.
SENSORS YOUR PERSONAL SECURITY COMPATIBLE COMPONENTS FROM THE SCHWAIGER HOME AUTOMATION SERIES Sensors 3 in 1 multi-sensor • Movement - temperature humidity - light • Wall or ceiling mounting possible • Sensitivity adjustment prevents the detection of small animals • Movement - temperature - light • Can be used to control scenarios.
Temperature sensor • Remote control with concealed radiator mounting • Automatic control of preset temperatures • Detection of open windows with switching to energy saving mode • Direct temperature input ZHD 01 CLIENTS HDMI™ TV Stick The SCHWAIGER® HDMI TV Stick is a receiver or controller for your TV. With the stick the user interface for controlling the Gateway is displayed on the screen. You can perform all the settings on your TV with the included remote.
ACTUATORS YOUR PERSONAL HELPERS HAUPTTEXT COMPATIBLE COMPONENTS FROM THE SCHWAIGER HOME AUTOMATION SERIES Actuators 1-way/2-way wireless wall switch Adapter plug as switches • Switching connected devices on and off, e.g. for lawn irrigation or water fountains • Operation by means of a button or Z-Wave possible • Built-in repeater for greater coverage ZHS 03 ZHS 12 Adapter plug as a switch Adapter plug as a dimmer • Adapter plug outlets for devices up to max.
Thermostatic radiator Blind module • Module for temperature control of radiators • For valves with RA connections (30 x 1.
Important safety information! Installation must be carried out by competent persons. Before setting up and first using the unit, please read and follow the safety instructions carefully.
Important safety information! Do not touch any contacts on the unit with your fingers or metal objects. This could cause a short circuit. Before cleaning the unit, it must be unplugged from the mains outlet. To clean the unit, use a soft dry cloth. Never spray cleaning agents directly onto the unit. Do not use any cleaning solutions that might damage the surface of the unit.
HOME AUTOMATION MANUFACUTRER’S INFORMATION Dear customer Should you require any technical support and not be able to get it at your specialist dealer’s, please contact our technical support team. Schwaiger GmbH Würzburger Straße 17 90579 Langenzenn Hotline: +49 (0) 9101 702-199 www.schwaiger.de homeautomation@schwaiger.
