Montageanleitung Instruction Manual LWH 1737 Bedienungsanleitung Wandhalter Instruction manual Wall Holder
HERSTELLERINFORMATION Sehr geehrter Kunde, sollten Sie technischen Rat benötigen und Ihr Fachhändler konnte Ihnen nicht weiterhelfen kontaktieren Sie bitte unseren technischen Support. Schwaiger GmbH Würzburger Straße 17 90579 Langenzenn Hotline: +49 (0) 9101 702-299 www.schwaiger.de info@schwaiger.
Inhaltsverzeichnis WARNUNG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sicherheitshinweise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Benötigtes Werkzeug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Paketinhalt. . . . . . . . . . . . . . . . . . . . . . . . .
WARNUNG • Beginnen Sie mit der Installation des Produkts erst, nachdem Sie die Anweisungen und Warnungen in dieser Installationsanleitung gelesen und verstanden haben. Falls Sie irgendwelche Fragen zu einer Anweisung oder Warnung haben, nehmen Sie bitte Kontakt mit Ihrem Händler vor Ort auf. • Bitte beachten Sie bezüglich des erforderlichen Abstands von der Wand die Empfehlung in der Installationsanleitung, um das Risiko von Sachschäden zu vermeiden.
Wichtig: Beginnen Sie mit der Installation des Produkts erst, nachdem Sie die Anweisungen und Warnungen in dieser Installationsanleitung gelesen und verstanden haben. Falls Sie irgendwelche Fragen zu einer Anweisung oder Warnung haben, nehmen Sie bitte Kontakt mit Ihrem Händler vor Ort auf.
1. Montage an der Steinwand Entfernen Sie das Doppelklebeband auf der Rückseite der Schablone. Wand-Schablone Löcher vorbohren. Benutzen Sie die Schablone, um die Wandhalterung auszurichten. Schrauben Sie die Wandhalterung an. Wand-Schablone Entfernen Sie die Wand-Schablone. Achtung: Der Abstand der Wandhalter richtet sich nach dem horizontalen VESA-Abstand Ihres TV-Gerätes.
WARNUNG • Stellen Sie bei der Montage der Wandhalterung an Porenbetonstein sicher, dass für die Dübel in dem Loch mindestens 1-3/8” tatsächliche Betonstärke vorhanden sind. Bohren Sie nicht in Mörtelfugen! Stellen Sie sicher, in einen soliden Teil des Steins zu bohren, im Allgemeinen mindestens 2,5 cm von der Seite des Steins entfernt.
2. Installieren der Montage- und Abstandshalter oben 2.
3. Einhängen des TV-Geräts in die Halterung Schlüsselloch-Öffnung Wartung Sobald Sie die Halterung und den Flachbildschirm montiert haben, überprüfen Sie, dass diese ausreichend gesichert und sicher zu nutzen sind. Sie sollten den festen Sitz aller Schrauben alle zwei Monate kontrollieren. Falls Sie wegen der Installation Bedenken haben, nehmen Sie wegen Details bitte mit Ihrem Händler oder der Serviceabteilung Kontakt auf.
min. 100 mm - max. 600 mm Technische Daten min. 100 mm - max.
COMPANY INFORMATION Dear customer, In case you will need further technical support and your dealer is not available please contact our help line: Schwaiger GmbH Würzburger Straße 17 90579 Langenzenn Hotline: +49 (0) 9101 702-299 www.schwaiger.de info@schwaiger.de Opening hours Monday to Thursday: 08:00-17:00 h Friday: 08:00-14:30 h Contents WARNING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Safety Notes . .
WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet. If you have any question regarding any of the instructions or warnings, please contact your local distributor. • This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
1. For Solid Brick and Concrete Mounting Remove the backing paper of doubleside adhesive from the wall template. wall template Drill pilot holes. Use the wall template as a template to paste on the wall. Screw wall plates onto the wall. wall template Remove the wall template. WARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8” (35mm) for using the concrete anchors.
2. Install Adapter Brackets top of TV 2.
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. Screw the VESA plate onto the TV. Tighten all screws but do not over tighten.
3. Hanging the TV onto the Wall Plate key hole openings After the wall mount has been safely secured to the wall, Carefully lift your TV so that top adapter brackets fit into key hole openings. Slide down wall plate into place. Make sure your TV is securely and correctly attached. Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your dealer if you have any questions.
min. 100 mm - max. 600 mm Technical Information min. 100 mm - max.
BDA_LWH1737