Manual

2100 / IO-100 Manual
IM110107
RD: AUG 2021
R.L. 11A
11
MODEL*
Voltage
VAC
Current
amps
Btu/hr input
Total Weight
lbs. [kg]
Length
Inches [mm]
2135 / IO-135
24 40 VA** 35,000 53 [24] 44”
2150 / IO 150
24 40 VA** 50,000 57 [26] 44”
2152 / IO 152
24 40 VA** 50,000 / 36,500 57 [26] 44”
HEATER DIMENSIONS & CONFIGURATIONS
Figure 3: DIMENSIONS
Side View
Table 3: CAPACITIES & CONFIGURATIONS
• Add fuel gas designation to model number: -N for natural gas; -L for
• The enclosure cabinet of all models is constructed of marine grade stainless steel with the
finish appearance option of stainless steel, or high temperature flat black coating.
• Models 2152 and IO-152 are two-stage heaters
** Transformer Capacity: For multiple heater installation, the first heater requires 40VA and
each consecutive heater requires 20VA. The sum total will be the required Transformer capac-
ity. If total VA exceeds one transformer capacity select the next higher VA rated transformer.
End View
MOUNTING KIT OPTIONS see illustrations next page
ITEM NO PART NUMBER DESCRIPTION
1 JP-2100-CB-K UNIVERSAL MOUNTING KIT
2 JP-2100-MB WALL MOUNTING KIT
3 JP-2300-MK ARM WALL MOUNTING KIT
4 JP-2300-PK POST MOUNTING KIT
CAUTION: This heater must be rigidly mounted to prevent movement from wind force.
Mounting Brackets: Ensure that anchor to the structure is of sufficient strength,
integrity and workmanship, to adequately support the weight of the heater and
any other potential loads such as snow build up, and wind force.
Mount heater up to maximum 30° angle.
11
44”
10.5”