Universal Mounting Kit

IM220417-1A

2100/2300 Universal Mounting Kit Manual

AUG 2021

RL: 1A

JP-2100-CB-K: Universal Mounting Kit for Patio Heater

Note:

It is the installer’s responsibility to ensure:

• Adequate mounting strength and

integrity to the structure using

field supplied 3/8” lag screws or

bolts

• Maintain required clearances to com-

bustibles from heater

• Refer to manual: heater weights;

required clearances

Tel 1-877-686-3779 | www.schwankgroup.com

Component Quantities and Material Specifications

each Kit:

1. 2 x Ceiling/Wall Bracket - 12 ga. [0.102”]

316 S/S

2. 2 x 24” [610 MM] Channel Leg - 12 ga.

[0.102”] 316 S/S

3. 2 x Heater Attachment Bracket - 12 ga.

[0.102”] 316 S/S

4. 12 x ¼” x ¾” Stainless Steel Bolts

5. 12 x ¼” Stainless Steel KEP Nuts [lock wash-

er attached]

PAGE 1
JP-2100-CB-K: Universal Mounting Kit for Patio Heater Component Quantities and Material Specifications each Kit: 1. 2 x Ceiling/Wall Bracket - 12 ga. [0.102”] 316 S/S 2. 2 x 24” [610 MM] Channel Leg - 12 ga. [0.102”] 316 S/S 3. 2 x Heater Attachment Bracket - 12 ga. [0.102”] 316 S/S 4. 12 x ¼” x ¾” Stainless Steel Bolts 5.
PAGE 2
Assembly: • The 24” Channel Leg can be cut to a shorter length • Ensure required clearances to combustibles from heater are maintained • Fasten the Ceiling/Wall Bracket and Heater Attachment Bracket to the Channel Leg using two supplied ¼” bolts at each connection as illustrated. • The arc of holes in the Ceiling/Wall Bracket allows angling of the Channel Leg from the bracket up to 45°, and/or mounting the bracket to a sloped ceiling.