Owner`s manual

Remote Control Manual

IM060930

RD: SEPT 2006

RL: 03A

Sample Patio Set-up:

Dining patio with 3 zones. Each zone

has 2 opposing heaters that provide best

comfort when operating simultaneously

as a pair. The entire patio area will be

controlled by one Hand Set Transmitter.

Set all ‘House Codes’ to the same Letter

Code on one Hand Set Transmitter and

six receivers (one in each heater). Heat-

ers

H-1 & H-2: Set receiver Unit

Codes to “

1” - the hand set transmitter

will activate both heaters in Zone 1 with

Group I / Button 1.

Similarly, set receivers in heaters

H-3 & H-4 to “2” and H-5 & H-6 to “3”. Both Zone 2 heaters

turn On/Off with button set “

2” and both heaters in Zone 3 with button set “3”.

Alternately, for individual control of heaters, set each receiver Unit Code to a unique number

(

H-1 to “1”, H-2 to “2”, etc.). Heaters H-1 to H-4 will be controlled by hand set transmitter

Group I - Buttons 1 to 4 and heaters H-5 and H-6 will be controlled by Group 2 - But-

tons 1 and 2.

Kits / Part Numbers for Remote Control systems:

NOTE: Items are ordered separately

 JP-1234-HS REMOTE CONTROL HAND SET – Accessory; single item with Velcro fastener

 JP-1234-RK REMOTE CONTROL RECEIVER – LUMINOUS HEATER– Accessory Kit;

Includes: receiver JP- 1234-RC, wires, Velcro Fastener, instructions

 JP-1234-TK REMOTE CONTROL RECEIVER – TUBE HEATER – Accessory Kit;

Includes: receiver JP- 1234-RC, 24V Relay JS-0568-KT, wires, Velcro Fastener, instructions

 JP-1234- RC REMOTE CONTROL RECEIVER – Part; single item with Velcro fastener

Refer to the enclosed wiring diagrams:



 2300 series Patio Heaters- Luminous Heater Page 8

 STW / IW & SPW / IWP Patio Heaters – Tube Heater Page 10

H-1

H-2

H-3 H-5

H-4 H-6

ZONE