RANGEHOOD & INSTALLATION GUIDE DS3170-9S www.schweigen.co.
Index 1. Welcome _____________________________________________________________________________________________________ 3 2.
1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your personal safety and the lasting value of your rangehood. We trust that you will enjoy your new Schweigen rangehood. Please always retain your proof of purchase to aid in any warranty queries.
2. Your Safety WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED. If this product is installed damaged, neither the supplier, nor the retailer, will be responsible for the costs associated with the repair, replacement, removal or re-installation of the appliances. 1.
2. Your Safety Before Installation 1. We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. 2. Please see our website www.schweigen.co.nz for recommended installers. 3. It is dangerous to modify any part of this appliance. Modification of any kind, will immediately void the warranty. 4. The manufacturer declines all responsibility in case of failure to adopt proper safety measures. 5.
2. Your Safety Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch fire. (Flambé) Maintenance and Service The rangehood surface should be cleaned with soft cloth and non-corrosive detergent. Do not leave the rangehood wet after cleaning or use, please keep rangehood dry.
3. Tips & Suggestions The Rangehood has one mode of operation: Air extraction: The air is drawn in and cleaned by the grease filters and directed outside. Please check the cleaning and maintenance section for the filters’ cleaning periods. For Users 1. Do not leave the frying pan or fryer unattended, as the oil could overheat and catch fire. 2. Never flambé any foods beneath the rangehood. The flames could cause a fire. 3.
4. Description Main Rangehood 1 Mounting Bracket 2 Extension Flue Piece 3 Main Flue 4 For use with Isodrive motor system 5 Male Plug (Main Power 240V) Used for silent and non silent models 6 Single Outlet 200mm 7 Reducer (For Isodrive 650 only) 8 Filter 9 Lamp (For GU10 fittings, please twist to remove) 1 2 3 4 5 6 7 NOTE: Filter and light quantity may vary from model to model. 9 Speed Control This rangehood is equipped with a 5 speed electronic control.
1 2 3 5. Operation Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, you will only hear the movement of air.
6. Cleaning & Maintenance WARNING Always switch off and disconnect power before cleaning. Surfaces Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance, Always make sure to dry the appliance after cleaning and never leave wet, as this will cause irreparable damage. Filters • For this appliance to function effectively, regular maintenance is a must.
6. Cleaning & Maintenance WARNING • If the grease filters are very dirty, the motor will extract only a small quantity of air, which reduces its efficiency; • The grease deposits that build up on the filter are highly flammable and COULD EASILY CATCH FIRE. • The manufacturer is exonerated from all responsibility in the event of fire due to poor maintenance of the grease filters. Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol.
6. Cleaning & Maintenance Cleaning the Exterior We recommended using a soft cloth, water and a liquid soap, rinsing it well and then drying it thoroughly. For better results, you can use high quality cleaning and protection products (eg. Steel Kleen) to clean your rangehood. WARNING • Make sure that the electrical power is off. • The recommended detergent is a solution of water and a neutral liquid soap. • It is very important for the liquid soap to not contain granules that could scratch the surface.
6. Cleaning & Maintenance Replacing the GU10 Light Bulb DANGER Always switch off and disconnect power before replacing the lights. Failure to do so may cause serious injury. Please be aware that the light bulb will retain heat for a short period of time after being switched off. Step 1 Remove the filters from the rangehood. Step 2 Gently push light holder down, turn light bulb anti-clockwise, pull the light bulb down and remove it from the light holder. Step 3 Gently push light holder down.
7. Installation DANGER Always switch off and disconnect power before installing the rangehood. Failure to do so may cause serious injury. Wall Mount Installation Every wall mounted rangehood has two primary mounting points and several secondary mounting points to firmly fix the rangehood in its place. Primary mounting points Use suitable bolts to mount the appliance on a secure surface. Please ensure that the holes for the two primary mounting points are level before installation.
7. Installation See Mounting Laws and Regulations WARNING If the user decides to install the rangehood at a distance of less than minimum height above the cooking surface, the company declines responsibility for damages suffered by the rangehood due to excess heat or damage to objects, people and others caused directly or indirectly by a malfunction, breakage or fire.
7. Installation Step 1 Secure rangehood to the wall using only primary mounting points. Check the level of the rangehood and adjust accordingly if necessary. Once level, continue to secure the rangehood via the secondary mounting points. Step 2 Feed through aluminium flexi duct from the outlet block to the kitchen ceiling. Step 3 Place flue covers on. Step 4 Attach wall mounting bracket to the wall. Slide inside extension flue piece up to the wall mount bracket and attach.
7. Installation Flexible Ducting for Isodrive Motor System For the Isodrive motor, please do not crush or kink flexi ducting, as it will reduce air flow and may cause noise to occur through the system. Ducting needs to be kept taut at all times. Please refer to the Isodrive motor installation guide for more details on flexi ducting with the silent system.
8. Maintenance Condensation Information The induction cooktop is designed to provide rapid heating, improved thermal efficiency and greater heat consistency. For some customers with an induction cooktop, condensation can form on their rangehood filters while using their cooktop. The induction cooktops’ heat source is contained in the conductive base of the pot.
8. Maintenance User advice to avoid condensation in the rangehood: • The rangehood should be switched on approx. 10 minutes prior to cooking and the delay shut down timer set after cooking has stopped in order to clear the fumes held in the flue. These steps will help clear the flue out fully. • Do not cook at full power straight away, i.e. start on low or medium power for a while so that the steel in the rangehood can warm up. • Filters must be kept clean.
Check motor switch. Please ensure that there is power to the rangehood and the rangehood is switched on. Rangehood does not work X X Light does not work X Model Feeding Voltage Lamp Power — Halogen (W) Lamp Power — LED (W) Page 20 Loud noise from the rangehood Technical Specifications DS3170S 220-240V 50Hz 2 x 35W (supplied) 2 x 1.
8. Maintenance Calling the Technical Assistance Service Hotline In the event that the failure is not due to the faults mentioned in Trouble Shooting, contact the Technical Service 0800 200 510. A service request will require the following information: • The purchase date • The rangehood model and motor type (eg.
9.
10. Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale.
Australia 8/3-4 Anzed Court, Mulgrave 3170 Victoria. Phone 1300 881 693 Email sales@schweigen.com.au Web www.schweigen.com.au New Zealand 5 Tolich Place, Henderson, Auckland 0610. Phone 0800 200 510 Email info.parex@emerson.com Web www.parex.co.nz Distributed by Axis Group International Pty Ltd.
