Installation Guide

Page 11

IMPORTANT: When

mounting pipe fan

locking holes to be in

outside end of pipe (fan

end)

Min 150mm long

150mm PVC pipe

Locking Screw

Min 50mm

Flexible 200mm

ducting

Bell-mouth Adaptor

Locking holes at 10 and

4 o’clock

Cord slots at bottom

(6 o’clock position)

Weather shield

upper most

NOTE: Ensure that power cord is fed through exit slot and

is not allowed to double back restricting fan inlet.

Attach weather shield using 3 screws provided

when wall mounting. Ensure weather shield is

upper most position (12 o’clock position) when

engaging locking screw

Fix fan module using side locking

screw at 4 & 10 o’clock

Figure 3 Wall Mount Option

1600 motor

4. Installation

NOTE: Ensure that power cord

is fed through exit slot and is

not allowed to double back

restricting fan inlet.