Installation Guide

Page 17
Figure 11 Roof mount option
Single Motor Installation Twin 200mm Outlet
(suitable for rangehoods with two 200mm outlets and one 1600 Isodrive motor)
This is for use where one motor is to be used and there are two 200mm outlets, refer gure 11.
Try to keep length of
exible ducting as even
as possible other wise
motors will draw air o
each other
Ensure exible ducting
is fully extended and as
short as possible. Use
smooth owing curves for
maximum air ow. Remove
excess ducting by trimming
to length.
200 x 200 x 200mm
If multi-t Y joint supplied you
will need to cut to size.
1600 motor
4. Installation