RANGEHOOD & INSTALLATION GUIDE UM1390-9S (09.2018/v1.0) www.schweigen.com.
1. Welcome Thank you for purchasing this Schweigen appliance. To achieve the optimal performance from your appliance, and to avoid the risk of accident or damage, it is essential to read this manual before installation and first time use. This guide contains important information on the use and maintenance of the appliance, as well as important safety notes. Your appliance has been thoroughly checked for safety and functionality before being packaged and leaving the manufacturer.
Table of Contents 1. Welcome_____________________________________________________________________ 2 2. Important Safety Information____________________________________________________ 4 3. Description___________________________________________________________________ 7 4. Installation___________________________________________________________________ 8 5. Operation___________________________________________________________________ 14 6.
2. Important Safety Information Please read the instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual for future use or for subsequent owners. Check the appliance for damage after unpacking it. Do not connect or install the appliance if it has been damaged in transport. Any damage must be reported within 48 hours.
2. Important Safety Information Before Installation We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. Please see our website www.schweigen.com.au for a list of our recommended installers. It is dangerous to modify any part of this appliance. Modification of any kind will immediately void the warranty. The manufacturer declines all responsibility in case of failure to adopt proper safety measures.
2. Important Safety Information Product Use The Rangehood has one mode of operation: Air extraction: The air is drawn in by the rangehood, filtered through the grease filters, and then expelled outside. Please check the cleaning and maintenance section for advice on the filter’s cleaning schedule. This product is designed for household use and must not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. Never flambé any food beneath the rangehood.
3. Description Rangehood 1 1. For use with Isodrive© motor system 2. Male plug (main power 240V) 3 2 3. Single 200mm outlet 4. Reducer (for Isodrive© 650 only) 5. Filter 6. Lamp (for GU10 fittings, please twist to remove) NOTE: Filter and light quantity may vary from model to model. *IMPORTANT: Electronics MUST be accessible for service and/or maintenance once installed, failure to do so, will result in any charges involved with accessing the part (removal of cabinetry etc.
4. Installation System Overview 1. Isodrive Motor 2. Roof Seal Kit (Dektite)* 3. Support Straps* 1 4. Attach Flexi Duct to Bell-Mouth Adaptor using cable tie or ring clamp. Please DO NOT rip the ducting. 2 5. Isodrive Motor Power Lead (Male Plug) 3 4 6. Rangehood to Isodrive Motor Lead (Female Plug) 5 7. Main Power Lead (Male Plug, 10 Amp) 6 8 7 9 8. Flexi Ducting must be pulled taut. DO NOT crush or kink the ducting. 9.
4. Installation DANGER Always switch off and disconnect main power before installing the rangehood. Failure to do so may cause serious injury. Mounting Laws and Regulations • The location of the installation must have permanent openings for ventilation. • Regulations concerning the expelling of air must be fulfilled. • It is STRONGLY RECOMMENDED that the rangehood be installed centrally over the cooktop, this will greatly improve its performance.
4. Installation Overhead cabinet Rangehood Installation position It is important to consider the benchtop and overhead cabinetry depth before installing the rangehood. The information below is to be used as a guide only, drawings are not to scale and do not account for all circumstances. The cooktop is centrally installed in the benchtop in the diagrams below.
FRONT VIEW SIDE VIEW SIDE VIEW 4. Installation SIDE V SIDE VIEW Mounting and Fixing Points The diagrams below are a guide for all mounting points. A SIDE VIEW SIDE Side VIEW View TOP VIEW Front View FRONT VIEW Wall Cabinet B Front Mounting point A and B need to be tighten with slightly angled screws to pull the rangehood up tight to the cabinet. SIDE VIEW SIDE VIEW Bottom BOTTOMView VIEW TOP VIEW These support screws insert from the inside of the cabinet.
SIDE VIEW SIDE VIEW 4. Installation Optional Installation Example IMPORTANT TOP VIEW Please read the installation guide thoroughly prior to installation. This model has a different method of installation compared to standard undermounts. FRONT VIEW WARNING Please remove filters before installation. Failure to do so may damage the clips. BOTTOM VIEW Step 1 SIDE VIEW SIDE VIEW Construct cabinet according to rangehood specifications, make sure it will support the rangehood.
4. Installation Flexible Ducting Installation Please do not crush or kink flexi ducting, as it will reduce air flow and may cause noise to occur through the system. Ducting must be kept taut at all times. Isodrive Motor Setup NOTE Please refer to the Isodrive motor installation guide for more details on flexi ducting and Isodrive motor installation.
1 2 3 5. Operation Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, you will only hear the movement of air.
6. Cleaning and Maintenance WARNING Always switch off and disconnect power to the rangehood before cleaning. The manufacturer is exonerated from all responsibility in the event of fire due to poor maintenance of the filters and rangehood. Cleaning and user maintenance shall not be made by children without supervision. Filters • For this appliance to function effectively, regular maintenance is a must. • The function of the filter is to absorb the grease particles emitted during cooking.
6. Cleaning and Maintenance Surfaces The surface of the rangehood can be cleaned with warm soapy water and a soft sponge / cloth. • Never use abrasive detergents, scouring pads, steel wool or solvents on ANY part of this appliance. • Rinse with clean water and ensure that the appliance is completely dry after cleaning. • For better results, you can use high quality cleaning and protection products (eg. Steel Kleen) to clean your rangehood.
6. Cleaning and Maintenance Replacing the Lights DANGER Always switch off and disconnect power before replacing the lights. Failure to do so may cause serious injury. Please be aware that the light bulb may retain heat for a short period of time after being switched off. Step 1 Remove the filters from the rangehood. Step 2 Gently push light holder down, turn light bulb anti-clockwise, pull the light bulb down and remove it from the light holder. Step 3 Gently push light holder down.
7. Troubleshooting Cooking with Induction Cooktops Cooking with an induction or similar cooktop, may produce condensation on the rangehood. Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn, produces vapours rapidly. Because of the accelerated process, the rangehood filters do not have enough time to warm up, which increases the chance of condensation forming.
Loud noise from the rangehood Rangehood does not work X Light does not work X X X Rangehood air exaction is weak X X Rangehood does not direct air out (through chimney) X X X X been eaten through by rodents. Check the ducting has not come off the rangehood outlet or has taut. installed correctly, eg. Length of ducting used, keep the ducting Check Isodrive installation manual, make sure the flexi ducting is correct diameter ducting installed.
7. Troubleshooting Calling the Technical Assistance Service Hotline In the event that the failure is not due to the faults mentioned in Trouble Shooting, contact Customer Service. In Australia, Customer Service 1300 829 066 In New Zealand, Customer Service 0800 200 510 Lodging an online Service Request In the event that failure is not due the reason/s in the trouble shooting section, you can lodge an online Service Request. To lodge a Service Request, visit our website www.schweigen.com.
853 295 857 11 898 part of filter 3 8. Technical Specifications Model UM1390-9S Feeding Voltage 220-240V 50Hz Lamp Power — Halogen (W) 2 x 20W (optional) Lamp Power — LED (W) 2 x 3W Weight 8kg 350.5 350.5 UM1390-9S 16.4 47.5 367 367 390 390 47.5 170 20 170 20 170 20 16.4 20 170 39 39 Note: Product specifications subject to change without notice, images are for illustrative purposes only. Please check final product details with your retailer.
8. Technical Specifications 390 900 200 900 Note: Product specifications subject to change without notice, images are for illustrative purposes only. Please check final product details with your retailer. © Schweigen Home Appliances Pty Ltd.
9. Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale.
Australia 8/3-4 Anzed Court, Mulgrave 3170 Victoria. Phone 1300 881 693 Email sales@schweigen.com.au Web www.schweigen.com.au New Zealand 5 Tolich Place, Henderson, Auckland 0610. Phone 0800 200 510 Email info.parex@emerson.com Web www.parex.co.nz SCH00015 Distributed by Axis Group International Pty Ltd.
