Assembly & Owner's Manual

37
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capacities
- Last Workout, Averages, and Totals.
WhentheTOTALSdisplayedforastatisticexceedsthemaximumvalue,thecountwillstartagainat
zero.
• Total number of workouts—maximumis9999.
• Total hours—maximumis999:59(999hours,59minutes).
• Average speed—mph or km (per units in setup)
• Total distance—maximumis9999.9.
• Total calories—maximumis999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1. Push the Schwinn Advantage
™
button at the Power-Up Mode screen. The Console display
shows the User Profiles.
2. Use the Increase() and Decrease() buttons to select a User profile, and push START/ENTER
to make your selection.
3. AfteryouselecttheUserprofileoption,youhavetwooptions:VIEWSTATSandWORKOUT.
Use the Increase() and Decrease() buttons to go to the Statistics option, and push START/
ENTER to make your selection.
4. TheConsoledisplayshowstheUserStatisticsmenuoptions—LASTWORKOUT,AVERAGES,
TOTALS and RESET STATS. Use the Increase/Decrease buttons to move between the menu
options, and push START/ENTER to make your selection.
5. Use the Increase/Decrease buttons to move between the values, or after a few seconds the
workout statistics start to scroll automatically. You can use the Increase/Decrease buttons to
movethroughtheresultsmanually.PushSTOPtoexittotheUserStatisticsmenu.
The RESET STATS option will clear the accumulated workout values. Use the Increase/De-
crease buttons to change your selection between YES and NO, and push START/ENTER. Push
STOPtoexittheRESETSTATSoption.
6. Push STOP to go back to the User profile menu—View Stats or Workout option.