Owner`s manual

27
Schwinn Advantage
™
User Setup Mode
The Schwinn
®
45 Series console lets you store and use 2 User profiles. The User profiles automatically record the workout
results for each User profile, and let you view your workout data.
The User profile stores the following data:
• Name—up to 19 characters
• Age
• Weight
• Gender
• Custom Workout (program profile)
• Total time (last workout, average, and total)
• Average speed (last workout, average, and total)
• Total distance (last workout, average, and total)
• Total calories (last workout, average, and total)
• Total workouts
Note: Push the STOP button to go back to the previous screen.
Add User Profile
1. From the Power-Up Mode screen, push the Schwinn Advantage
™
button to go to User Setup Mode.
Note:IfnoUserProfileissetup,theConsolewillshowtheNamepromptforUser1.IfaUserProfiledoesexist,goto
the Edit User Profile option to select CREATE USER 2 and continue with the steps below.
2. The Console display shows the “ENTER NAME” prompt. Push START/ENTER.
3 Enter a name for the user. Use the Increase/Decrease buttons to move through the alphabet and blank space (found
between A and Z). To set each letter, push the START/ENTER button. Push the STOP button to go back to the previ-
ous letter.
 PushandholdtheSTART/ENTERbuttonfor3secondstocompletetheentryandgotothenextdataprompt.
4. TheConsoledisplayshowsthe“AGE30”prompt.UsetheIncrease/Decreasebuttonstoadjustthedefaultvalue,and
pushSTART/ENTERtocompletetheentryandgotothenextprompt.
5. TheConsoledisplayshowsthe“WEIGHT150”prompt.UsetheIncrease/Decreasebuttonstoadjustthedefault
value,andpushSTART/ENTERtocompletetheentryandgotothenextprompt.
6. TheConsoledisplayshowsthe“GENDERMALE”prompt.UsetheIncrease/Decreasebuttonstoadjustthedefault
value,andpushSTART/ENTERtocompletetheentryandgotothenextprompt.
Note: Due to screen limitations, “FEMLE” is the abbreviation for female.
7. The Console display shows the “CREATE CUSTOM YES” prompt. Use the Increase/Decrease buttons to move to the
YES or NO option. To start setup of your Custom Workout, go to YES and push START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/ENTER. The Console goes
back to the Power-Up Mode screen.
Note: The Custom workout can be created at a later time by editing the User.
8. If you start the Custom Workout setup, the Program Display will show the left column (workout interval) is active by
flashing, with a default resistance level of 3. Use the Increase/Decrease buttons to adjust the resistance level of the
activeinterval.PushSTART/ENTERtorecordtheresistancelevel.Thenextcolumntotherightbecomesactive.
Note:TheConsoledisplayshowsthemessage“Nof20”duringsetup(Nisthecurrentinterval).Themaximum
number of intervals is 20.
Push and hold START/ENTER to complete the Custom Workout setup.
9. The Console goes back to the Power-Up Mode screen