Owner`s manual

28
Edit User Profile
1. From the Power-Up Mode screen, push Schwinn Advantage
™
button and hold for 3 seconds to go to User Setup
Mode.
 ToexittheUser Selection option, push STOP and the console will go back to the Power-Up Mode screen.
2. The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE <Name>).
Note: If only one User was set up, the Edit User menu includes a CREATE USER 2 option. The steps to set up User 2
are the same as the CREATE USER option.
Use the Increase/Decrease buttons to move through the Edit menu options, and push START/ENTER to make your
selection.
 ToexittheEditUseroption,pushSTOPandtheconsolewillgobacktotheUser Selection option.
3. After you start the Edit function, the Console will show the Edit Name prompt. To edit the name, push START/ENTER.
Note: Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and Z). To
set each letter, push the START/ENTER button. Push the STOP button to go back to the previous letter.
 PushandholdSTART/ENTERtocompletetheentryandgotothenextdataprompt.OryoucantaptheSTART/EN-
TERbuttontoaddspacesuntilthenextdatascreenappears.
4. ToedittheotherUserdata(EDITAGE,EDITWEIGHT,EDITGENDER),usetheIncrease/Decreasebuttonstoselectan
option and push START/ENTER. Use the Increase/Decrease buttons to adjust, and push START/ENTER to set each
entr y.
5. The Console display shows the CUSTOM prompt. To edit your Custom Workout, push START/ENTER.
6. The Program Display will show the left column (workout interval) is active by flashing. Use the Increase/Decrease
buttonstoadjusttheresistanceleveloftheactiveinterval.PushSTART/ENTERtorecordtheresistancelevel.Thenext
column to the right becomes active.
Note:TheConsoledisplayshowsthemessage“Nof20”duringsetup(Nisthecurrentinterval).Themaximumnumber
of intervals is 20.
Push and hold START/ENTER to accept the Custom Workout.
7. When done, push STOP and the Console will go back to the User Selection option.
Delete a User Profile
1. From the Power-Up Mode screen, push the Schwinn Advantage
™
button and hold for 3 seconds to go to User Setup
Mode.
 ToexittheSchwinn
®
Advantage option, push STOP and the Console will go back to the Power-Up Mode screen.
2. The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE <Name>). Use the In-
crease/Decrease buttons to go to the Delete option, and push START/ENTER to make your selection.
 ToexittheDeleteoption,pushSTOPandtheconsolewillgobacktotheEditandDeleteoptions.
3. After you start the Delete function, the Console will show a prompt to delete the User profile, or not delete the user and
go back to the Edit and Delete options. Push START/ENTER to make your selection.
4. After you delete the user, the Console will go to the Power-Up Mode screen.
Custom Workout
After your Custom Workout is set up in your User Profile, you can start the program from the CUSTOM workout option
in the Program Menu. The Console display will prompt you to set the Time for the workout (default is 30:00). Use the
Increase/Decrease buttons to adjust the Time value, and push START/ENTER to begin the workout.
Changing Resistance Levels
Push the Increase() or Decrease() buttons to change the resistance level at any time in a workout program.