003–3799–042310A
Nautilus, Inc., World Headquarters, 16400 SE Nautilus Dr. Vancouver, WA, USA 98683, (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, customerservice@schwinnfitness.com | Europe, Middle East & Africa 49 02203 2020 0, technics-EMEA@nautilus.com | Germany & Austria + 49 02203 2020 0, Switzerland + 41 26 460 77 66, United Kingdom + 44 1908 267 345, Asia Pacific & Latin America (360) 859-5180, technics-APLA@nautilus.
Parts Item Qty Description Item Qty 1 1 Main Frame 7 1 Console Mast (with pre-installed Handlebar Bracket) 2 1 Front Stabilizer 8 1 Console 3 1 Rear Stabilizer 9 1 Handlebars 4 1 Seat Post 10 1 Pedal, Left (L) 5 1 Adjustment Knob (pre-installed) 11 1 Pedal, Right (R) 6 1 Seat 12 1 Water Bottle Holder Item Qty Description Hardware Item Qty A 4 Carriage Bolt M8 x 65 C 4 Acorn Nut B 8 Arc Washer D 4 Hex Screw M8 x 15 Description 3 Description
Assembly 1. Attach Stabilizers to Main Frame 2.
3. Attach Seat Post to Main Assembly Note: Hardware is pre-installed on Seat and not on Hardware Card. Note: The Adjustment Knob is pre-installed on the Main Frame. 4.
5. Install Console Mast on Main Assembly NOTICE: Do not crimp Console Cable. 6. Install Handlebars on Console Mast Note: NOTICE: Hardware is pre-installed on Console Mast and not on Hardware Card. Make sure the Handlebar Bracket has an equal distance between the two ends of the bracket and the bracket mount on the Console Mast.
. Install Console on Console Mast Note: NOTICE: Hardware is pre-installed on Console and not on Hardware Card. Do not crimp Console Cable. Make sure that the switch on the back of the Console is set to B. 8. Install Water Bottle Holder Note: Hardware is pre-installed on Console Mast and not on Hardware card.
9. Install Batteries in Console Note: The console uses D size batteries (LR20). Make sure that the batteries point in the direction of the +/–– indicators in the battery bay. If you use rechargeable batteries, the optional power adapter will not recharge the batteries. Optional Power Adapter The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the optional Power Adapter.
Final Inspection Inspect your machine to ensure that all fasteners are tight and components are properly assembled. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual. Leveling Your Bike The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level and stable before you exercise.
Printed in China
