Assembly & Owner's Manual

3. Attach Seat to Seat Post and Frame

Note: Hardware is pre-installed on Seat and not on Hardware Card.

NOTICE: TheAdjustmentKnobispre-installedontheMainFrame.MakesuretheAdjustmentKnobengagestheSeat

Post.

DonotsettheSeatPostpositionhigherthanthestopmark(MAX)onthetube.

4. Install Console Mast on Main Assembly

NOTICE:Aligntheclipsonthecableconnectorsandmakesuretheconnectorslock.DonotcrimpConsoleCable.

6mm