user manual

ManualsBrandsSchwinn ManualsExercise BikeExercise Bike 231

RECUMBENT

ASSEMBLY GUIDE

PN 001-6977 REV A (072606)

Summary of content (24 pages)

PAGE 1
RECUMBENT ASSEMBLY GUIDE PN 001-6977 REV A (072606) ASSEMBLY GUIDE
PAGE 2
CONTENTS Table of Contents Hardware ................................................................................................ 2 Exploded View ........................................................................................ 4 Parts List ................................................................................................. 5 Assembly Instructions ..........................................................................6 Important Contact Numbers ....................................
PAGE 3
Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270 2 �� I-4 lock nut for M8 (1) I-6 Screws M8x16mm �� I-11 Regular Washer 10*25*2t(1) I-1 M8xP1.25x85mm �� I-13 Carriage Bolt M8xP1.
PAGE 4
�� I-8 Screw M5*16MM (4) �� I-9 Allen Bolt M8xP1.0x35mm (5) I-12 Regular Washer 12.5*20*2t(1) �� I-7 Allen Bolt M8xP1.0x45mm (4) �� I-10 Knob (1) I-3 Flat Washer 8*16*2t(20) HARDWARE Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.
PAGE 5
EXPLODED VIEW EXPLODED VIEW � �� 4 ��
PAGE 6
Ref. Description Qty A A-1 A-2 B C C-1 C-2 C-3 C-4 D D-1 D-2 D-17 D-18 D-19 D-22 E F G H I-1 I-2 I-3 I-4 I-5 I-6 I-7 I-8 I-9 I-10 I-11 I-12 I-13 J K K-1 K-2 K-3 L L-1 L-2 Computer Computer bracket Screw M5x14L Handlebar Handlebar mast Screw M8x1.25x16 Curved Washer Upper heart rate wire Upper computer wire Main frame Lower heart rate wire Lower computer wire AC Adaptor Screw M8x1.25x16L Flat Washer 8x16 Seat rail bracket Front stabilizer Pedal pair Rear stabilizer Seat rail Screw M8xP1.
PAGE 7
ASSEMBLY INSTRUCTIONS Basic Assembly Principles Here are a few basic tips that will aid in the assembly process . By using these principles, you can simplify each process and save yourself extra time and effort. 1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2.
PAGE 8
ASSEMBLY INSTRUCTIONS Step 1 Install Front and Rear Stabilizers Parts: • Front Stabilizer (Ref. E ) • Rear Stabilizer (Ref. G ) • M8x16 Screws (Ref. I-6) Tools: • Supplied Allen Wrench 1-1 Attach the Rear Stabilizer (G) to the rear of the Main Unit using two M8 X 16mm screws (I-6). 1-2 Attach the Front Stabilizer (E) with the UP sticker and wheels toward the front of the Main Unit using two M8 X 16mm screws.
PAGE 9
ASSEMBLY INSTRUCTIONS Step 2 Install Pedals Parts: • Right Pedal (F-R) • Right Pedal (F-L) Tools: • Supplied Pedal Wrench 2-1 Screw the Left Pedal ( has an “L” stamped into the end of the pedal ) into the Left Crank Arm. Note: The Left Pedal has a left handed thread and screws in counter clockwise. 2-2 Screw the Right Pedal ( has an “R “stamped into the end of the pedal ) into the Right Crank Arm.
PAGE 10
ASSEMBLY INSTRUCTIONS Step 3 Install Handlebar Parts: • Seat Frame (Ref. K) • Handlebar (Ref. J) • Four M8x16 screws (Ref. I-5) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 3-1 Align Handlebar with holes in Seat Frame. 3-2 Route the handlebar heart rate wire under the junction box making sure that the wires won’t be pinched. Connect the handlebar heart rate wire to the jack on the Seat Frame junction box labeled “PULSE INPUT”. 3-3 Install and completely tighten the hardware.
PAGE 11
ASSEMBLY INSTRUCTIONS Step 4 Install Bottle Holder Parts: • Water Bottle Holder (Ref. K-2) • Four M5x16 Screws (Ref. I-8) • Seat Bottom (Ref. K-1) Tools: • Supplied Phillips Head Screwdriver 4-1 Align the Water Bottle Holder under the left side of the Seat Bottom. 4-2 Install and completely tighten the hardware.
PAGE 12
ASSEMBLY INSTRUCTIONS Step 5 Install Seat Bottom Parts: • Seat Bottom (Ref. K-1) • Four M8x1x45 Screws (Ref. I-7) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 5-1 Align the Seat Bottom (K-1) with the Seat Frame (K). 5-2 Install and completely tighten the hardware.
PAGE 13
ASSEMBLY INSTRUCTIONS Step 6 Install Seat bracket Parts: • Seat Bracket (Ref. L) • Seat Back (Ref L-1) • Four M8x16 Screws (Ref. I-5) • Four 8x16x2 Washers (Ref. I-3) Tools: • Supplied Allen Wrench 6-1 Align the Seat Bracket(L) with the Seat Back (L-1). 6-2 Install and completely tighten the hardware.
PAGE 14
ASSEMBLY INSTRUCTIONS Step 7 Install Seat Back Assy and Seat Back Cover Parts: • Seat Back Cover (Ref. L-2) • Seat Back Assy (From step 5) • Four M8x35 Screws (Ref. I-9) • Four 8x16x2 Washers (Ref. I-3) • Seat Adjust Knob (Ref. I-10) • Washer 10x25x2t (Ref. I-11) Tools: • Supplied Allen Wrench 7-1 Place the threaded post on the Seat Bracket (L) through the slot in the Seat Frame (K). 7-2 Attach the Seat Back Cover to the Seat Back Assembly using four M8x35 Screws (I-9) and four 8x16x2 Washers (I-3).
PAGE 15
ASSEMBLY INSTRUCTIONS Step 8 Prepare to Install Seat Assembly Tools: • Supplied Allen Wrench 8-1 Unscrew the the seven screws and washers (D-18) that secure the Seat Rail (H) and remove the Seat Rail from the unit. (Figure A) Note: You will have to disconnect the Heart Rate Wire (M). Do not let the Heart Rate Wire fall into the frame. 8-2 Unscrew the two screws and washers (D-18) that secure the Seat Rail Bracket (D-22) and remove the bracket from the Seat Rail.
PAGE 16
ASSEMBLY INSTRUCTIONS Step 9 Install Seat Assembly Parts: • Seat Assembly (From step 3-6) • Seat Rail (Ref. H) • Seat Rail Bracket (Ref. D-22) Tools: • Supplied Allen Wrench 9-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the Seat Assembly onto the Seat Rail (H). Release the Adjustment Knob to lock the Seat Assembly in place. NOTE: Make sure the seat Adjustment Knob is on the side of the Seat Rail that has the holes. 9-2 Reinstall the Seat Rail Bracket.
PAGE 17
ASSEMBLY INSTRUCTIONS Step 10 Install Handlebar Mast Parts: • Handlebar Mast (Ref C) Tools: • Supplied Allen Wrench 10-1 Remove the four Allen Bolts (C-1) and Curved Washers (C-2) from the frame . 10-2 Connect the Upper and Lower Computer Wires and Heart Rate Wires. (Detail A) 10-3 Insert the Handlebar Mast (C) into the main unit. 10-4 Re-install the four Allen Bolts and Curved Washers and completely tighten.
PAGE 18
ASSEMBLY INSTRUCTIONS Step 11 Install Handlebar Parts: • Handlebar (Ref B) • Washer (Ref I-3) • Screw M8x16 (Ref I-5) 11-1 Tuck the Computer Wires into the Mast to allow insertion of the Handlebar . 11-2 Slide the Handlebar (B) into the Mast and secure with the Console M8x16 Screw (I-5) and Washer (I-3) . (Figure A) 11-3 Pull the Computer Wires back up through the Handlebar as shown.
PAGE 19
ASSEMBLY INSTRUCTIONS Step 12 Install Computer Bracket Parts: • Computer Bracket (Ref. A-1) • Angle Adjust Knob (Ref. I-2) • Carriage Bolt M8x1.25x85 (Ref. I-13) • Screw M8x85 (Ref. I-1) • 2 Washers (Ref. I-3) • Hex Nut (Ref. I-4) Tools: • Supplied Socket and Flat Wrenches 12-1 Align the Computer Bracket (A-1) with the holes in the Mast. (See assembled view for reference) 12-2 Install and completely tighten the hardware.
PAGE 20
Parts: • Computer (Ref. A ) Tools: • Supplied Phillips Head Screwdriver 13-1 Remove the four screws from the back of the Computer (A). 13-2 Feed the Fan Wire (M) through the slot in the Computer Bracket (A-1) and insert it in the receptical found in the slot on the back of the Computer. 13-3 Connect the Heartrate Wire (C-3) from the mast to the lead coming out of the back of the Computer. 13-4 Connect the Computer Wires (C-4) to the slotted connection in the back of the Computer.
PAGE 21
ASSEMBLY INSTRUCTIONS Step 14 Plug in AC Adapter Parts: • AC Adapter (Ref. D-17) 14-1 Plug the AC Adapter (P) into the recepticle on the front right of the unit and into a 110 volt outlet.
PAGE 22
ASSEMBLY INSTRUCTIONS Assembly is complete! Please reference the Owner’s Manual for information regarding computer operation, product maintenance, Warranty information, and general fitness and exercise guidelines.
PAGE 23
IMPORTANT CONTACT NUMBERS IMPORTANT CONTACT NUMBERS If you need assistance, please have both the serial number of your machine and the date of purchase available when you contact the appropriate Nautilus office listed below. OFFICES IN THE UNITED STATES: E-mail: cstech@nautilus.com • NAUTILUS INNOVATION CENTER Nautilus, Inc. 1886 Prairie Way Louisville, Colorado, USA 80027 Phone: 800-NAUTILUS (800-6288458) Fax: 800-898-9410 • TECHNICAL/CUSTOMER SERVICE Nautilus, Inc.