Owner`s manual

3. After you start the Edit function, the Console will show the Name prompt. To edit the name,

push START/ENTER.

Note: Use the Increase/Decrease buttons to move through the alphabet and blank space

(found between A and Z). To set each letter, push the START/ENTER button.

 PushandholdSTART/ENTERtocompletetheentryandgotothenextdataprompt.Oryou

cantaptheSTART/ENTERbuttontoaddspacesuntilthenextdatascreenappears.

4. To edit the other User data, push START/ENTER at the screen prompt: EDIT AGE, EDIT

WEIGHT, EDIT GENDER. Use the Increase/Decrease buttons to adjust, and push START/

ENTERtocompleteeachentryandgotothenextprompt.

5. The Console display shows the CUSTOM prompt. To edit your Custom Workout, push START/

ENTER.

6. The Program Display will show the left column (workout interval) is active. Use the Increase/

Decrease buttons to adjust the resistance level of the active interval. Push START/ENTER to

recordtheresistancelevel.Thenextcolumntotherightbecomesactive.

Note: The Console display shows the message “N of 20” during setup (N is the current

interval).Themaximumnumberofintervalsis20.Aminimumof10intervalsmustbeset.

Push and hold START/ENTER to accept the Custom Workout.

7. When done, push STOP and the Console will go back to the User Selection option.

Delete a User Profile

1. From the Power-Up Mode screen, push the Schwinn Advantage

™

button and hold for 3 sec-

onds to go to User Setup Mode. The Console will display the name of User Profile 1. Use the

Increase/Decrease buttons to move through the User Profiles, and push START/ENTER to

make your selection.

 ToexittheSchwin

Advantage option, push STOP and the console will go back to the Power-

Up Mode screen.

2. The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE

<Name>). Use the Increase/Decrease buttons to go to the Delete option, and push START/

ENTER to make your selection.

 ToexittheDeleteoption,pushSTOPandtheconsolewillgobacktotheEditandDelete

options.

3. After you start the Delete function, the Console will show a prompt to delete the User profile, or

not delete the user and go back to the Edit and Delete options. Push START/ENTER to make

your selection.

4. After you delete the user, the Console will go to the Create, Edit and Delete options.