Owner`s manual

36
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capacities
- Last Workout, Averages, and Totals.
WhentheTOTALSdisplayedforastatisticexceedsthemaximumvalue,thecountwillstartagainat
zero.
• Total number of workouts—maximumis9999.
• Total hours—maximumis999:59(999hours,59minutes).
• Average speed—mph or km (per units in setup)
• Total distance—maximumis9999.9.
• Total calories—maximumis999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1. Push the Schwinn Advantage
™
button at the Power-Up Mode screen. The Console display
shows the User Profiles.
2. Use the Increase() and Decrease() buttons to select a User profile, and push START/ENTER
to make your selection.
3. AfteryouselecttheUserprofileoption,youhavetwooptions:VIEWSTATSandWORKOUT.
Use the Increase() and Decrease() buttons to go to the Statistics option, and push START/
ENTER to make your selection.
4. TheConsoledisplayshowstheUserStatisticsmenuoptions—LASTWORKOUT,AVERAGES
and TOTALS. Use the Increase/Decrease buttons to move between the menu options, and
push START/ENTER to make your selection.
5. Use the Increase/Decrease buttons to move between the values, or after a few seconds the
workout statistics start to scroll automatically. You can use the Increase/Decrease buttons to
movethroughtheresultsmanually.PushSTOPtoexittotheUserStatisticsmenu.
In TOTALS, there is a RESET STATS option to clear the accumulated workout values. Use the
Increase/Decrease buttons to change your selection between YES and NO, and push START/
ENTER.PushSTOPtoexittheRESETSTATSoption.
6. Push STOP to go back to the User profile menu—Stats and Workout options.