Owner's Manual

3 Assembly

Figure 3.6

ATTACH THE LOCKON GRIPS

Follow these steps if your bicycle is equipped with lockon grips.

❶Clean the handlebar surface.

❷ Slide the lockon grip over the handlebar as far as it can go.

Note: Rotate the clamp so the clamp screws are on the

underside of the handlebar. Figure 3.6

❸ Adjust the grip to how you want it to feel.

❹ Using a 2.5 mm Allen wrench ghten the clamps on both

ends of the lockon grip. Check the grip is securely aached

and does not rotate or slip.

❺Snap the lockon grip cap onto the end of the lockon grip.

❻Repeat steps 1 - 5 for the second lockon grip.

Lockon grips

Lockon grip cap