Assembly & Owner's Manual

40
Console seTup mode
TheConsoleSetupModeletsyouinputthedateandtime,settheunitsofmeasurementtoeitherEnglishorMetric,change
themachinetype,controlthesoundsettings(on/off),orseemaintenancestatistics(ErrorLogandRunHours–forservice
technicianuseonly).
1. HolddownthePAUSE/ENDbuttonandRightbuttontogetherfor3secondswhileinthePower-UpModetogointothe
Console Setup Mode.
Note:PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.
2. TheConsoledisplayshowstheDatepromptwiththecurrentsetting.Tochange,pushtheIncrease/Decreasebuttonsto
adjustthecurrentlyactivevalue(flashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactive
value(month/day/year).
3. PushOKtoset.
4. TheConsoledisplayshowstheTimepromptwiththecurrentsetting.PushtheIncrease/Decreasebuttonstoadjustthe
currentlyactivevalue(flashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactivevalue(hour/
minute/AMorPM).
5. PushOKtoset.
6. TheConsoledisplayshowstheUnitspromptwiththecurrentsetting.Tochange,pushOKtostarttheUnitsoption.Push
theIncrease/Decreasebuttonstochangebetween“MILES”(ImperialEnglishunits)and“KM”(metricunits).
Note:IftheunitschangewhenthereisdatainUserStatistics,thestatisticsconverttothenewunits.
7. PushOKtoset.
8. TheConsoledisplayshowstheSoundSettingspromptwiththecurrentsetting.PushtheIncrease/Decreasebuttonsto
changebetween“ON”and“OFF”.
9. PushOKtoset.
10. TheConsoledisplayshowstheTOTALRUNHOURSforthemachine.
11. Forthenextprompt,pushtheOKbutton.
12. TheConsoledisplayshowstheSoftwareVersionprompt.
13. Forthenextprompt,pushtheOKbutton.
14. TheConsolewilldisplaythePower-UpModescreen.