Assembly & Owner's Manual

40
Console seTup mode
TheConsoleSetupModeletsyoucontrolthesoundsettings(on/off),adjustthedateandtime,orseemaintenancestatistics
(TotalRunHoursandSoftwareVersion–forservicetechnicianuseonly).
1. HolddownthePAUSE/STOPbuttonandRightbuttontogetherfor3secondswhileinthePower-UpModetogointothe
Console Setup Mode.
Note:PushPAUSE/STOPtoexittheConsoleSetupModeandreturntothePower-UpModescreen.
2. TheConsoledisplayshowstheDatepromptwiththecurrentsetting.Tochange,pushtheIncrease/Decreasebuttonsto
adjustthecurrentlyactivevalue(flashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactive
value(month/day/year).
3. PushOKtoset.
4. TheConsoledisplayshowstheTimepromptwiththecurrentsetting.PushtheIncrease/Decreasebuttonstoadjustthe
currentlyactivevalue(flashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactivevalue(AMor
PM/hour/minute).
5. Push OK to set.
6. TheConsoledisplayshowstheUNITSpromptwiththecurrentsetting.PushtheIncrease/Decreasebuttonstochange
between“MILES”and“KM”.
7. PushOKtoset.
8. TheConsoledisplayshowstheSoundSettingspromptwiththecurrentsetting.PushtheIncrease/Decreasebuttonsto
changebetween“ON”and“OFF”.
IftheSoundhasbeenmuted,theConsolewilldisplaythe“AUDIOOFF”promptbeforeaWorkoutstartsasareminder.
9. PushOKtoset.
10. TheConsoledisplayshowstheTOTALRUNHOURSforthemachine.
11. Forthenextprompt,pushtheOKbutton.
12. TheConsoledisplayshowstheSoftwareVersioncode.
13. Forthenextprompt,pushtheOKbutton.
14. TheConsoledisplayshowstheLOGprompt.
15. Forthenextprompt,pushtheOKbutton.
16. TheConsolewilldisplaythePower-UpModescreen.