Assembly & Owner's Manual

44
6. Manuallyrotatethebelt1/2ofthecircumferenceandapplylubricantagain.
7. Unfoldthemachine.Refertothe“UnfoldingtheMachine”procedureinthismanual.
Keepclearofthemovementpathofthewalkingdeck.Holdontothewalkingdeckuntilapproximately2/3ofthe
movement down. The walking deck can possibly drop quickly in the last part of the movement.
Ifyouusedspraylubricant,wait5minutesbeforeturningonpowertothemachinetoallowtheaerosoltodissipate.
8. Connectthepowercordbackintothemachineandthenintothewalloutlet.
9. Turnonthepowertothemachinewiththepowerswitch.
10. Staytoonesideofyourmachineandstartthebeltattheslowestspeed.Letthebeltoperateforapproximately15
seconds.
Besurenottotouchthewalkingbeltorsteponthepowercord.Keepbystandersandchildrenawayfromtheproduct
you are servicing at all times.
11. Switchoffyourmachine.
12. Takecaretocleanupanyexcesslubricantfromthedeck.
Todecreasethepossibilityofslipping,besurethedeckareaisfreefromgreaseoroil.Cleanoffanyexcessoil
from the machine surfaces.