Owner's Manual

26
©2014 PACIFICCYCLE INC.
Click
Click
Click
The following illustrations will help you better understand how
to operate an integrated shifter lever. To shift the front derailleur
from a smaller to a larger chainring, push lever (A) inward with
your ngers. To shift from a larger to a smaller chainring, push
lever (B) inward with your ngers.
To shift the rear derailleur from a larger to a smaller rear cog,
press lever (B) inward with your nger. To shift from a smaller to
a larger rear cog, press lever (A) inward for one click. It is also
possible to shift through multiple rear cogs at one time by push-
ing lever (A) for one full stroke. There are three different click
stops for this operation, as illustrated in the diagram to the right.
It is also important to note that the front shifter lever has what
is referred to as a “trim” feature. This trim feature allows for
an intermediate shift that will slightly adjust the front derailleur
inward or outward by a small amount. This feature is useful in
situations where the chain may rub on the inside of the front
derailleur as a result of gearing selections where the chain is at
a more exaggerated angle. To make a trim adjustment, simply
push the lever for a fraction of the distance of a normal shift.
You will notice the intermediate click once the lever has reached
the trim position.
Lever B
Lever A
Lever B
start position
Lever A
start position
Lever a
Lever b
Lever B
start position
Lever A
start position
Operate Lever a to
shift from smaller
to larger chainring.
Operate Lever b to
shift from larger to
smaller chainring.
Operate Lever B to
shift from larger to
smaller cog.
Operate Lever A to
shift from smaller
to larger cog.