Owner's Manual

Step 3.

Insert fork assembly through head tube of frame assembly.

Be sure that fork is completely inserted through frame to allow

approximately 22mm (7/8”) of fork steer tube to show through

top of head tube. Push stem clamp onto fork steer tube.

Stem clamp must fully seat onto fork steer tube. There should

be no space between head tube and stem clamp. Insert han-

dlebar into fork steer. Be sure to insert far enough to cover

“Minimum Insertion” mark on handlebar. Align handlebar and

front wheel, tighten stem clamp with 13mm (1/2”) wrench.