Instructions / Assembly

3 Assembly
20
WARNING!
Figure 3.7
Figure 3.8
Figure 3.9
ATTACH THE FRONT BRAKE CABLE
Failure to properly set the brakes may result in the inability to
stop the bicycle movement and cause serious injury or death.
Be sure the brakes are funconing properly before using the
bicycle.
If the brakes are not aached follow these steps:
❶ Rotate the cable adjustment barrel and cable nut unl the
slots are aligned with the slot on the brake lever body.
Figure 3.7
❷ Press the brake lever towards the grip.
❸ Slide the brake cable through the slots and place the cable
head into the brake lever. Figure 3.8
❹ Release the brake lever. Figure 3.9
❺ Lightly pull on the cable, and rotate the cable nut and cable
barrel so they are no longer aligned.
Note: See Secon 4: Adjusng the Brakes if adjustments are
needed.
Cable adjustment
barrel slot
Cable nut slot
Brake cable slot Brake lever
Cable head
Brake cable
4
2
5
3
1