Instructions / Assembly

3 Assembly
26
Flat Brace
❶ Remove the outer axle nut and washer from the rear
wheel axle. Figure 3.17
❷ Place the at wheel brace onto the axle.
❸ Place the brace stabilizer washer onto the axle and align it
so that the notch ts into the rear frame drop out.
❹ Replace the washer and axle nut.
❺ Tighten the axle nut securely, making sure that the wheel
brace stays in the proper vercal posion. The elongated
hole on the wheel brace allows the training wheel height to
be adjusted for proper t.
Brace stabilizer washer
C-shaped wheel brace
Axle nut
Training wheel
Rear wheel axle
Inner axle nut
DO NOT REMOVE!
2
3
Washer
4 5
4
Figure 3.17