Instructions / Assembly

3 Assembly
28
Figure 3.20
ATTACH THE PEGS
Important! Periodically check to make sure pegs are ght.
Some models may come equipped with 2 or 4 pegs. To install:
❶ Do not loosen or remove axle nuts. Figure 3.19
❷ Check to make sure axle nuts are properly ghtened before
installing pegs.
❸ Thread the pegs on the axle over the axle nut.
❹ Insert a screwdriver or similar tool through the peg holes
and ghten by turning the peg with the tool. Figure 3.20
❺ Repeat steps three and four for the remaing pegs.
Figure 3.19
Axle nut
3
Peg
4
2