Instructions / Assembly

Maintenance 6
51
Anunseatedrecanruptureunexpectedlyandcauseserious
injuryordeath.Besurethereisproperlyseatedwhen
inangthetube.
Follow these steps to x a at re:
❶Matchtubesizeandresize(seeresidewallforsize).
❷Removethewheelfromthebicycle.Deatetheretube
completely.
❸Squeezetherebeadsintothecenteroftherim.
❹Oppositethevalve,useabicyclerelevertoprythere
beadupandoutoftherim.Repeataroundthewheelunl
onebeadisotherim.
❺Removetube.Releasesecondrebead.
❻Removere.
❼Carefullyinspectinsideoftherimandreforthecauseof
theat.
❽Inatethetube¼fullandplaceinsidere.
❾Insertthevalvestemthroughvalvestemholeinrim.
REPAIRING A FLAT TIRE
❿Startatthevalvestemandinstalltherstbeadontothe
rim.Repeatforthesecondbead.
⓫Slowlyinatetheretube,checkingthereisseated
properlyandnotpinchedastheretubeisinated.
⓬Inatetorecommendedpressure(seeresidewall).
WARNING!